TinyTrak4 question - APRS Forum at eHam.net

$\'\'$

$\'\'$

$\'\'$

eHam.net Forum : APRS : TinyTrak4 question

Forum Help

1-4 of 4 messages

Page 1 of 1

TinyTrak4 question	Reply
by CTHAM on May 2, 2009	Mail this to a friend!
So last night I was programming it with the program to add my callsign I have a question which I don't know if it's normal or not.. I noticed if you turn on the TT4 then run the config program it will say it can't find it.. But if you run the config program to search for the TT4 (it's on COM 1) right after the LED's stop going back and forth it will find it. So I was doing some testing in UI-view last night I guess it found the TT4 on COM 1 I really can't tell. I just know if I did something like send beacon or send message it would never transmit right away it seems to be on it's own interval. So did I miss a step here? 73, KB1QXO

RE: TinyTrak4 question	Reply
by KG6HXO on May 4, 2009	Mail this to a friend!
The TT4 may ignore the request from your serial port if its involved in doing something important, like resetting or transmitting. Thats normal, not to worry. Allen VHS AF60F

RE: TinyTrak4 question	Reply
by WA9AFM on June 11, 2009	Mail this to a friend!
I've had the same thing happen with the TT3. Usually after one or two more tries, 'Mr. Computer' finds it.

Page 1 of 1

Next Topic: Software to create WAV packet
Previous Topic: D7A users in Houston area??

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.

$\'\'$