10 meter calling frequency - DXing Forum at eHam.net

$\'\'$

$\'\'$

$\'\'$

eHam.net Forum : DXing : 10 meter calling frequency

Forum Help

1-5 of 5 messages

Page 1 of 1

10 meter calling frequency	Reply
by AC8EA on June 20, 2009	Mail this to a friend!
I've been searching for a standard SSB 10 meter calling frequency that's commonly used, but can't seem to find one. Is there a particular frequency that I should use to call CQ on a seemingly dead band to see if anyone might be monitoring it in the US, or hopefully DX? I woud like to monitor also and call CQ every once in a while.

RE: 10 meter calling frequency	Reply
by VE9AAE on June 20, 2009	Mail this to a friend!
While I don't operate 10 meters all that much, I believe 28.400.00 might be a good freq. That's where I go and then tune around slightly to find any activity. 73, VE9AAE.

RE: 10 meter calling frequency	Reply
by AC8EA on June 20, 2009	Mail this to a friend!
Just found this web page: http://www.qsl.net/kd4sai/10meter.html It shows 28.380 and 28.425 as 10/10 SSB Intl Calling Frequencies. But it appears it may have last been updated in 2002. I used this in the address field: javascript:alert(document.lastModified) On standard http pages it will show you the last time it was updated.

RE: 10 meter calling frequency	Reply
by KB9CRY on June 20, 2009	Mail this to a friend!
400 is commonly used. 495 is the standard DX freq.

RE: 10 meter calling frequency	Reply
by W7ETA on June 20, 2009	Mail this to a friend!
http://www.qsl.net/k3asi/modechart.htm

Page 1 of 1

Next Topic: Interesting propagation
Previous Topic: C21TI

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.

$\'\'$