Kam 8.2 and RTTY - Digital Forum at eHam.net

$\'\'$

$\'\'$

$\'\'$

eHam.net Forum : Digital : Kam 8.2 and RTTY

Forum Help

1-4 of 4 messages

Page 1 of 1

Kam 8.2 and RTTY	Reply
by KC8FWD on June 4, 2009	Mail this to a friend!
What programs are out there for using my Kam 8.2 with Enhancement board in RTTY mode? Thanks Mike KC8FWD

RE: Kam 8.2 and RTTY	Reply
by KB6HOH on June 19, 2009	Mail this to a friend!
Mike, What PC are you running? Laptop/Desktop? Windows (What Flavor)? Apple or Linux? Steve Reply to kb6hoh@comcast.net

RE: Kam 8.2 and RTTY	Reply
by AA6YQ on June 19, 2009	Mail this to a friend!
WinWarbler supports your KAM. You can run soundcard RTTY (using the included MMTTY engine) in parallel, which gets you panoramic reception and "click to tune". Take a look at http://www.dxlabsuite.com/winwarbler/RTTY%20Full%20Screenshot.jpg That's MMTTY output in the upper receive pane, and KAM '98 output in the lower receive pane. WinWarbler is free, and available via http://www.dxlabsuite.com/download.htm 73, Dave, AA6YQ

RE: Kam 8.2 and RTTY	Reply
by W4PC on July 1, 2009	Mail this to a friend!
http://www.cssincorp.com/Radio_Operations_Center_Software.html Host mode interface for your Kam, two versions of RTTY, internal to the TNC and soundcard version. 20 macros for RTTY mode. (10 mode specific, and 10 global), Macros variables from everything from {MYCALL} to {LOGCALL} (auto logging into the built in logbook when you do the exchange with the macro.

Page 1 of 1

Next Topic: 40M Digital Interference
Previous Topic: Analog Repeater linking (NOT IRLP or Echolink)

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.

$\'\'$