CW filters for TS940S - Elmers Forum at eHam.net

$\'\'$

$\'\'$

$\'\'$

eHam.net Forum : Elmers : CW filters for TS940S

Forum Help

1-5 of 5 messages

Page 1 of 1

CW filters for TS940S	Reply
by K7UA on October 30, 2005	Mail this to a friend!
Are the YK-455C-1 and the YG-455C-1 filters interchangeable? My 940s manual recommends the YG, but I have been told that the YK will interchange. Does anyone know for sure? I used the search feature and the same question was answered a long time ago with a link to another vendors filters. I have a chance to pick up a YK. Will it work? Thanks. K7UA

RE: CW filters for TS940S	Reply
by X-WB1AUW on October 31, 2005	Mail this to a friend!
http://www.eham.net/classifieds/detail/162987 http://www.eham.net/classifieds/results/73 Inrad equivalent 400HZ filter to the KW YG-455C-1 but superior performance. For 455Khz 2nd IF in 930 or 940 $85 shipped to CONUS

RE: CW filters for TS940S	Reply
by K7UA on October 31, 2005	Mail this to a friend!
Thank you for the info. I am still wondering if the YK-455C-1 will directly substitute for the YG-455C-1. K7UA

RE: CW filters for TS940S	Reply
by X-WB1AUW on October 31, 2005	Mail this to a friend!
It seems as if each one is for a different IF. If so, your rig is designed to use both. One would be better than none, especially if you found a good deal on one. Given a choice, I would opt for a filter for the first IF, and then maybe add external DSP. Bob

RE: CW filters for TS940S	Reply
by K0XU on October 31, 2005	Mail this to a friend!
The yg-455 was made for the 930/940 rigs, the yk-455 was made for the 140/680 (and maybe others). I can tell you that, but I can't tell you what would happen if you put the yk in your 940 (it probably wouldn't fit for one thing) Jim

Page 1 of 1

Next Topic: IC-706MkIIG audio died
Previous Topic: Noise filter for mobile

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.

$\'\'$