PSK31 on 6m - Elmers Forum at eHam.net

$\'\'$

$\'\'$

$\'\'$

eHam.net Forum : Elmers : PSK31 on 6m

Forum Help

1-2 of 2 messages

Page 1 of 1

PSK31 on 6m	Reply
by VA3FCM on October 19, 2000	Mail this to a friend!
Hi I have heard that there is PSK31 activity on 6m ssb. Would anyone know if this is true, and if so, what frequencies would be so used. Also, I would be grateful for any advice with respect to interfacing an Icom 2100h or a Yeasu FT620B to a computer for the purpose of working PSK31. 73 de va3fcm Charles

RE: PSK31 on 6m	Reply
by K9QDR on October 20, 2000	Mail this to a friend!
Hi, Charles, There is some PSK31 activity on 6M. Check at 50.289 USB and you might be able to copy some signals if conditions are favorable. I am in EM69, Bloomington, Indiana, USA and have only seen signals during a couple of openings this summer. I do however, keep monitoring the frequencies. Charles, I cannot be of much help to you with the interface of your rigs. I WAS using a straight in approach on my IC-706, but added an inexpensive DiGiPan Interface device for better control of ALC level and improved "operability". I decided to make the IC-720-A "PSK ready" in addition. The little box helps a great deal. Both rigs feed the RX audio direct to the computer soundboard LINE-IN input through a simple "brut force" audio switch from Radio Shack. Lee Easley, K9QDR leasley@indiana.edu

Page 1 of 1

Next Topic: Cigarette odor
Previous Topic: 10 Meter Frequencies

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.

$\'\'$