eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Speak Out
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


QSL Managers
     

Ham Links
     


eHam.net Forum : Elmers : icom 7000 and lcd/tft computer screen monitor???? Forum Help

1-7 of 7 messages

  Page 1 of 1  


icom 7000 and lcd/tft computer screen monitor???? Reply
by VE7REN on December 21, 2008 Mail this to a friend!
ok,first off. all new to me with this lcd/tft to the radio thing.
i see guys always using the 7000 with a seperate screen. on the back of the radio is a plug jack that says {video output jack}. if i wanted to run the radio with my 17in lcd monitor,would i just need to plug into this?? is it that simple?? is there anything else i would need? i dont have the radio,but was considering one. the ft950,i have seen using a lcd screen too. would it be sililar with that rig also??
ve7ren
 
RE: icom 7000 and lcd/tft computer screen monitor? Reply
by KA8OCN on December 21, 2008 Mail this to a friend!
I have one connected to my TV in the shack via the Video jack (RCA connector) I had to fiddle with the settings in the menu to make it fit the screen.

If your TV does not have a Video input feed it in a VCR Video input.

Hope this helps
Delbert McCord KA8OCN
 
RE: icom 7000 and lcd/tft computer screen monitor? Reply
by WA7NCL on December 21, 2008 Mail this to a friend!
The output is NTSC composite video. You have to have a TV type device that is old school video. I have used a portable DVD player.

I think maybe you better scrounge you video device soon cuz the US is switching over in Feb 2009.

A possible way to get the IC7K on a computer screen is to put the output into a video capture or TV card first and then display it on the computer screen. Of course you need a computer or laptop as well.

The IC7k graphics look pretty crude when you put them on a big screen. Just like old style big screen tvs.
 
RE: icom 7000 and lcd/tft computer screen monitor? Reply
by VE7REN on December 21, 2008 Mail this to a friend!
im still kinda lost. as long as i have video in jacks on the tv it would work i assume,but i wanted to use the 17in monitor with a cable. ill have to do more research on the 7000. ill read the manual and see if it helps.
 
RE: icom 7000 and lcd/tft computer screen monitor? Reply
by VE7REN on December 21, 2008 Mail this to a friend!
i seen a 7000 hooked up to a big tv screen on utube. looked like a 42-46 in lcd. looked alright,but waaaaaayyy to big for my needs.
 
RE: icom 7000 and lcd/tft computer screen monitor? Reply
by VE7REN on December 21, 2008 Mail this to a friend!
i seen a 7000 hooked up to a big tv screen on utube. looked like a 42-46 in lcd. looked alright,but waaaaaayyy to big for my needs.
 
RE: icom 7000 and lcd/tft computer screen monitor? Reply
by WV4L on December 22, 2008 Mail this to a friend!
There is a seller at Ebay that has 7 inch monitors with an interface produced by the seller that are specifically made for the IC7000. Maybe the interface he produces would work for a 17 inch monitor. Just do a search over at Ebay for the IC7000 and it should come up. Then you could contact him for the particulars. You might be able to just get the interface and not have to run it through another video device.

Hope this helps!!

73!

Wayne C.
 

  Page 1 of 1  

 
Next Topic:   Rohn Tower install
Previous Topic:   PSK with older rigs
Email Subscription
You are not subscribed to this topic.

Subscribe!
My Subscriptions
Subscriptions Help


Search Elmers:

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.