Dial slipage on FT101E - Elmers Forum at eHam.net

$\'\'$

$\'\'$

$\'\'$

eHam.net Forum : Elmers : Dial slipage on FT101E

Forum Help

1-2 of 2 messages

Page 1 of 1

Dial slipage on FT101E	Reply
by N5EQL on March 13, 2004	Mail this to a friend!
(Yaesu FT101E) when tuning, the outer skirt turns but the dial sometimes slips. Is this adjustable? I looked over the manual but cannot find anything about this problem. I posted on the boat anchor forum but received no responses...any help here! Thanks! Hal

RE: Dial slipage on FT101E	Reply
by KD5ZBV on March 14, 2004	Mail this to a friend!
The dial is designed so you can move it in order to calibrate the frequency. However, over time it can start slipping on its own. If you disassemble the vfo knob assembly, you'll find some felt discs in front and behind the dial. They may need to be replaced. How you replace them is up to your own creativity...

Page 1 of 1

Next Topic: Guidance on Installing coaxial cable underground
Previous Topic: How to use the Realistic Pro-2006 Scanner? Please

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.

$\'\'$