Icom 735 erratic Frequency Display - Elmers Forum at eHam.net

$\'\'$

$\'\'$

$\'\'$

eHam.net Forum : Elmers : Icom 735 erratic Frequency Display

Forum Help

1-2 of 2 messages

Page 1 of 1

Icom 735 erratic Frequency Display	Reply
by AA2RM on July 15, 2001	Mail this to a friend!
I have a IC735 in which the frequency dial often does nothing when the radio is first turned on. After a few minutes (and some rapid twirling) it begins to work, but it does not "track" sometimes doing nothing for a 1/2 turn or so or jumping up several 1/10ths of a Mhz before coming back down. The memories still work, but the memory battery is still the original from 1993. Everything else seems to work fine. I sent an e-mail to Icom some months ago, but heard nothing back from them. ANY ideas or suggestions would be most helpful before I send it somewhere for repair. 73DE Bill, AA2RM

RE: Icom 735 erratic Frequency Display	Reply
by KG9IO on July 16, 2001	Mail this to a friend!
http://www.icomamerica.com/support/troubleshooting/ic-735.html Give this a try. I have an Icom 745 and the info on this site helped me a lot. Bill KG9IO

Page 1 of 1

Next Topic: What are they called and where do I buy them ????
Previous Topic: PSK-31 Need an interface that can work wid an IC70

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.

$\'\'$