KENWOOD PC-1 - EmergencyCommunications Forum at eHam.net

$\'\'$

$\'\'$

$\'\'$

eHam.net Forum : EmergencyCommunications : KENWOOD PC-1

Forum Help

1-3 of 3 messages

Page 1 of 1

KENWOOD PC-1	Reply
by CU7BE on August 22, 2009	Mail this to a friend!
HI I m tryng to connect a KENWOOD PC-1 (phonepatch), to a Kenwood TM-241A, and i need help to connect the MIC connector from the PC-1 to the radio. I know the connections by the user manual of the TM-241A, but i don´t have the manual of the PC-1 (phonepatch), saw some manuals from NET but always from PC1-A , i don´t know if theyr the same, but the wires colors doesn´t match to the colors of my PC-1, in this model the wires colors are 4: RED,Black,Wite and a stripped wire. If some one know this equipente please help, this could be very useful in my iland, in emergency situacions. thanks 73´ CU7BE d.e.a.a@sapo.pt

RE: KENWOOD PC-1	Reply
by W3JKS on August 22, 2009	Mail this to a friend!
If you download the Kenwood PC-1A Schematic from the link (Manuals-Kenwood-PC1A) on www.mods.dk (it is only 1 page in PDF), you will see the diagram of the connections for the PC-1 and the PC-1A. 73s, john W3JKS/AAT3BF/AAM3EDE/AAA9SL

RE: KENWOOD PC-1	Reply
by K6RMR on September 17, 2009	Mail this to a friend!
If you have the PC1 that is a 4 pin mic connector. The PC1-A is an 8 pin. You need to get the Kenwood MJ-88 Mic adaptor that converts 8 pin round to Modular. Kenwood made an adaptor that converted 4 pin to 8 pin. It was the MJ 48. Kenwood does not make it any more. Make your own adaptor . On the 4 pin 1 is mic hot and 4 is mic ground. 2 & 3 are PTT. On the 8 Pin, 1 is Mic Hot and 7 is Mic Ground. 2 is PTT Hot and 8 is PTT Ground. Stan

Page 1 of 1

Next Topic: Dedicated Doppler Radar Display for Hamshack
Previous Topic: ARES club management software

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.

$\'\'$