eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Speak Out
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


QSL Managers
     

Ham Links
     


eHam.net Forum : Satellites : VX-7r Setup Forum Help

1-5 of 5 messages

  Page 1 of 1  


VX-7r Setup Reply
by KC0UXC on January 29, 2006 Mail this to a friend!
Does anyone have a link on how to set up the VX-7R for AO-51? Even a quick walk through would work. Thanks in advance!!

KC0UXC
 
RE: VX-7r Setup Reply
by KD5WZB on January 30, 2006 Mail this to a friend!
The manual has everything you need.

Program a split memory. 435.310 for the downlink, set a tone of 67.0Hz, and set 145.920 for the uplink (again by using the manual's instructions). Once the memory channel has been setup, go to it and press and hold the V/M button. The "MR" beside the frequency becomes "MT" and now you can tune away from the programmed RX frequency to compensate for doppler shift.

It does work, I use it this way myself.
 
RE: VX-7r Setup Reply
by NE0P on February 8, 2006 Mail this to a friend!
But make sure that you set the PL tone of 67.0 for the 2 meter side. Setting it for the UHF side may leave a different tone set up for 2 meters. I have heard AO51 on the stock rubber duck with the VX7R on a high elevation pass, but wasn't able to get into it. Still an amazing HT-and the best one on the market in my opinion.

CU on the sats

73s John NE0P
 
RE: VX-7r Setup Reply
by K9CHP on February 11, 2006 Mail this to a friend!
Doppler shift: you could program for it in memories, give them meaningful names and keep is simple.
Antenna: I recommend getting an Arrow II antenna, but you may be able to get in with a Comet 24SMA or such.
Schedule: check the AO-51's schedule on www.amsat.org as there are times it is not set up for V/U mode.

CU on the sat, I'm looking for district 7 contacts.
 
RE: VX-7r Setup Reply
by KE7EYQ on February 18, 2006 Mail this to a friend!
I will make a contact with you from here in district 7 if you want. Go ahead and send me an e-mail, ke7eyq AT gmail DOT com. Unfortunately something is not working correctly with my the uplink on my HT right now and I need to get it all sorted out, but I will be more than willing to try to give you district 7, Washington state.

73 Zach KE7EYQ
 

  Page 1 of 1  

 
Next Topic:   LabJack + Piggyback
Previous Topic:   Work AO-51 With Darned Near ANY Dual-band HT
Email Subscription
You are not subscribed to this topic.

Subscribe!
My Subscriptions
Subscriptions Help


Search Satellites:

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.