Vhf-hf interaction - VHFUHF Forum at eHam.net

$\'\'$

$\'\'$

$\'\'$

eHam.net Forum : VHFUHF : Vhf-hf interaction

Forum Help

1-3 of 3 messages

Page 1 of 1

Vhf-hf interaction	Reply
by K3JVB on September 3, 2006	Mail this to a friend!
Also posted on another forum Recent storm damage has made me have to consolidate some antennas. I am considering adding a 6 and 2 meter omni loops to mt 50 foot Rohn push up mast. But...This will put them directly below a Five band Hex beam (10-12-15-17-20 meters) Any thoughts on interaction? Or how far below the hex, the loops should be?? Thanks 73

RE: Vhf-hf interaction	Reply
by KE4SKY on September 5, 2006	Mail this to a friend!
I run a similar setup with stacked KG6KQ loops on a 30 ft. pushup at the end of the house and an A3S tribander with 40m add-on kit on a 48 ft. self-supporting tower which places it above the push-up and 10 ft. away from the house. Haven't noticed any interaction at all monitoring on any band with one rig while transmitting on the other.

Page 1 of 1

Next Topic: ic706mkIIg vs ft897d
Previous Topic: PLEASE HELP HELP HELP - LUNAR

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.

$\'\'$