PC interface for G1000DXC - elmers Forum at eHam.net

$\'\'$

$\'\'$

$\'\'$

eHam.net Forum : elmers : PC interface for G1000DXC

Forum Help

1-5 of 5 messages

Page 1 of 1

PC interface for G1000DXC	Reply
by OZ8AGB on October 16, 2007	Mail this to a friend!
I have been searching the web for a schematic for a PC interface to a Yaesu G1000DXC rotor box, but without any luck. Does anyone have a schematic for that?

RE: PC interface for G1000DXC	Reply
by WE1X on October 16, 2007	Mail this to a friend!
Don't have the schematic...However, I've been using the Idiom Press rotor control card for my G1000DXA for 6 years now. Works great. Harry WE1X

RE: PC interface for G1000DXC	Reply
by N6AJR on October 16, 2007	Mail this to a friend!
have you tried the yaesu site, the have lots of manuals available.

RE: PC interface for G1000DXC	Reply
by OZ8AGB on October 17, 2007	Mail this to a friend!
Thanks for the answers! Could not find any manual for the Yaesu GS-232. The board from Idiom Press seems like a nice affordable solution that I'll try out. vy 73 de OZ8AGB Michael

RE: PC interface for G1000DXC	Reply
by WE1X on October 17, 2007	Mail this to a friend!
Michael, In the past 6 or 7 years I only came across one or two hams that used the GS-232. It is very expensive for what it does. The Idiom Press card is easy to install and calibrate. Wonderful piece of kit that is compatible with a number of programs including MixW, Logger32, and Ham Radio Deluxe/DM780. Harry WE1X

Page 1 of 1

Next Topic: 10 Meter SSB
Previous Topic: HF Receiving Antennas in Small Space

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.

$\'\'$