eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Speak Out
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


QSL Managers
     

Ham Links
     


eHam.net Forum : mobileham : VX-6R Charging (NO BAT) Error Forum Help

1-4 of 4 messages

  Page 1 of 1  


VX-6R Charging (NO BAT) Error Reply
by W3SFG on August 10, 2009 Mail this to a friend!
I recently purchased a very slightly used Yaesu VX-6R. When the unit arrived, the battery had a full charge, so I used the rig for several hours without any problem. When I plugged in the provided NC-72B adaptor, though, I got a "NO BAT" error message on the display screen (the unit powered up on external DC, though, so it was clear that the charger was working). The tech support folks at Yaesu insisted this meant that the battery was defective, so I ordered a new one. I have the same issue again - the battery powered the unit until it's charge was depleted. When I connect the charge adaptor, I get power to the unit (it shows that it is running on external DC), but the charge light glows orange and I get a NO BAT message (and the battery does not charge). Since the battery originally powered the unit, I assume the contacts are in good shape.

Has anybody encountered this error before? Is there something that can be reset on the unit? Would this be solved by using a charging cradle (versus charging through the unit)? Or, will I need to send the HT back to Yaesu for repair?

Steven, W3SFG
 
RE: VX-6R Charging (NO BAT) Error Reply
by AA4PB on August 10, 2009 Mail this to a friend!
Did you leave it on the charger (radio off) for several hours to see if the NO BAT indication goes away? I expect the no bat condition is a result of the battery not drawing sufficient current from the charger. It may recover is you leave it on charge for a while.
 
RE: VX-6R Charging (NO BAT) Error Reply
by K9LAR on August 28, 2009 Mail this to a friend!
It may be a design or manufacturing problem with the LiIon battery packs.
I've had this happen with a couple of VX-6 battery packs. One pack would recharge just fine, but I would only get a "No Batt" display with the other one. The first time this happened (about a year ago), HRO returned the battery pack for a replacement under warranty.
When it happened on another battery pack just yesterday, I called Maha (battery manuf.) and they are sending me a replacement battery pack to exchange.
 
RE: VX-6R Charging (NO BAT) Error Reply
by KB0KYV on October 30, 2009 Mail this to a friend!
Hey, here's another possiblility nobody mentioned. The radio itself could be defective. Maybe that's why the original owner sold it.
 

  Page 1 of 1  

 
Next Topic:   Just installed NMO on my F-250. Awesome mounts!
Previous Topic:   NMO mobile antenna
Email Subscription
You are not subscribed to this topic.

Subscribe!
My Subscriptions
Subscriptions Help


Search mobileham:

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.