Cabe Run in 2003 Yukon? - mobileham Forum at eHam.net

$\'\'$

$\'\'$

$\'\'$

eHam.net Forum : mobileham : Cabe Run in 2003 Yukon?

Forum Help

1-3 of 3 messages

Page 1 of 1

Cabe Run in 2003 Yukon?	Reply
by N7TR on December 28, 2002	Mail this to a friend!
Just punched an NMO 3/4in mount in my Yukon, but was wondering if anyone has experience in how to get the cable to the sides? Thanks... Rich

RE: Cabe Run in 2003 Yukon?	Reply
by WA4PTZ on December 29, 2002	Mail this to a friend!
A plumbers fish tape works well. Also an old stainless steel whip that still has the ball on the end works. Almost any stiff wire will work but you want to keep something on the end to prevent damage to the headliner and cause it to get stuck while pushing it through. 73 - Tim

RE: Cabe Run in 2003 Yukon?	Reply
by KZ9G on January 15, 2003	Mail this to a friend!
I used an old mobile whip laying around the 2-way shop for theading the coax from the NMO hole to the edge of the headliner. Tape the coax to the end of the whip with some electrical tape and away you go. It worked well. 73.

Page 1 of 1

Next Topic: Using AM/FM factory mounting hole for 2M?
Previous Topic: Antenna Mounting on a Jeep

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.

$\'\'$