- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: HF: Vertical, Wire, Loop | HyEndFed Antenna (multiple models) Help

Reviews Summary for HyEndFed Antenna (multiple models)
HyEndFed Antenna (multiple models) Reviews: 25 Average rating: 5.0/5 MSRP: $99
Description: End fed dipole antenna made of finest materials. Monoband or
multiband antennes up to legel limit power possible
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the HyEndFed Antenna (multiple models).

Page 1 of 3 —>

CR7AFP Rating: 5/5 Nov 25, 2014 06:38 Send this review to a friend
80m Monobander - 5*****  Time owned: 0 to 3 months
You can't go wrong with this antenna.
Easy to put up, easy to tune, very well built and most important works very well with +/-200KHz of bandwidth without using a tuner.
This antenna replaced my 80m full wave delta loop, and i can tell that it outperforms the loop signal wise, and no noise other then the one i had S4-S5, so great performer.
HyEndCompany has a great customer service and High Quality Products.
PA0TDO Rating: 5/5 Nov 18, 2014 01:47 Send this review to a friend
Excellent product  Time owned: 0 to 3 months
As a home owner with a small back garden setting up an effective antenna is a real pain.
Using the 5-band 200w end fed antenna from the top of the house on a small (2m) mast to the farthest point in the garden where i erected a 7m glassfiber mast did the trick. Only some 18m of the antenna runs horizontally, the remainder running down alongside the mast. Works very well on 40 and up, even contact on 80m possible although height and length are clearly limiting factors.No tuner needed on any of the bands. Very neat solution!The neighbours are happy that the -very visible- symmetrical feedline I used for a doublet has disappeared from their view.
CR7AFP Rating: 5/5 Nov 13, 2014 10:52 Send this review to a friend
Hy Quality Product  Time owned: 3 to 6 months
I've ordered a 5 band 200W version and the antenna works great!
I liked it so much that i'm waiting for the 40m monobander and the 80m monobander.

Very well built, quality materials and great service from the HyEnd Company.
M0SAZ Rating: 5/5 Nov 10, 2014 00:48 Send this review to a friend
Simplicity is...  Time owned: 0 to 3 months
...attaching two ends of a wire from one end of the garden to another. And despite this simple design, I have found it to be comparable to dipoles at similar overall height and length.

As others have mentioned, if your shack isn't situated between both sides of the dipole, this can pose more of a challenge to getting the antenna mounted without your plot looking like an eye saw.

I have the 5 band version and although the manual mentions potentially trimming the 80m wire (after the coil), I found SWR to be acceptable for my ATU for the entire band, with a good proportion of 80m not requiring a tuner at all. Same goes for all other bands, all within 2:1 SWR! For the WARC bands, tuning is simple too.

Conditions have died down a little when I have been on air (usually late at night recently), but I still managed several EU contacts on a "first call" on my 5w FT-817 setup.

Build quality seems good and the wire used is thin but strong - excellent for stealth deployment.

Would buy another.

M0TTB Rating: 5/5 Sep 16, 2014 05:32 Send this review to a friend
Simple, adaptable & effective (40m QRO)  Time owned: 0 to 3 months
Anything centre fed is out of the question at my qth, and it's just an awkward place for any longish wire antennas, despite frequent comments from visiting amateurs saying I have a great garden/backyard for antennas... the reality is a bit different.

However this end fed works out fine, mounted at 40ft and dropping down slightly to around 35ft at the other end.

I'd spoken to many people around the world on the bands using the Par endfedz with great success, so naturally this beefed up version was appealing to finally get me qrv on 40m after years of threatening to do so.

The build quality of the product (40m monoband QRO) is exceptional and you would be pretty confident of this item lasting a good number of years in all conditions. The QRO version was heavier and larger than expected but that's reassuring in many ways.

SWR was under 2:1 across 7.000-7.200, although only just at the top end, so I may trim very carefully.

No EMC/RFI/TVI apparent, no visits from irrate neighbours after having used qro at various times of the day.

I didn't expect the world, just happy enough with decent inter-G, but have worked all continents on 40 ssb in the last week since putting it up, including JA, HS, VK and ZL. I'm certainly looking forward to the 40m dx season.
AE5HL Rating: 5/5 Aug 14, 2014 12:31 Send this review to a friend
Great antenna, particularly for a subdivision...  Time owned: 0 to 3 months
With some trepidation, spent the cash and ordered the 40/20/15/10 antenna (200 watts). I currently have it in a more or less "v" configuration. The "v" only about 20 feet up and the ends drop down to about 5-6 feet.

As expected, you will likely need a tuner with this antenna if you use it in any configuration other that what it was tested with (40? feet off the ground, horizontal).

The hardware is of durable and weatherproof construction, stainless steel for the fasteners, etc. Seems well built and will likely last many years. The wire is approximately 67 feet long and around 16 gauge. One interesting note, this antenna uses an L-C network to match the 4 bands and provide a reasonable feed point impedance for the transceiver.

15 and 10 have been more or less dead where I am located, thus, this review will be limited to 40 and 20. The installation is suboptimal on 40 meters but it works well, I am able to make the type of contacts one would expect with a traditional dipole on 40 meters, worked Mexico City, Pacific Northwest, East coast, etc. (regional) and there is DX to be had but pile ups are not my forte...

On 20 it shines, excellent signal reports with 100 watts (I've only operated QRP prior to this) are excellent and regional to long distance QSO's are handled without a hitch.

The caveat here is I am not by any means an expert nor is my installation ideal. The matchbox is supposed to provide a 50ohm match to coax and in an optimal installation, I have no doubt this would be the case but for most of us some sort of tuner is really desired. This does not detract from operation and I'm not using a long length of coax (20') so the wire is doing the radiating, or at least most of it, anyways.

I would give a 4.5 if it were possible, only because I thought the antenna was somewhat expensive but you get what you pay for so I may just be nitpicking here.

The best aspect of this antenna is the ease of installation at a location where some stealth is necessary and the fact that it works!
KB1TCE Rating: 5/5 Jun 30, 2014 15:41 Send this review to a friend
Just got another one (5 band)  Time owned: more than 12 months
I have been running a HF BBS for a few years. For the antenna, I started with a PAR 20 meter EndFedz. Wonderful antenna. As soon as the PAR 20/40 came out I got one and the results were similarly excellent.

However, I really wanted a multi-band end fed that didn't require a tuner. That's when I found the HyEnd line out of Holland. I ordered the 5 band antenna and quickly put it to use with the radio scanning 80-40-20 meters. It's been in place for about 2 years now.

More recently I wanted to get a good multi-band end fed for portable use. No contest - I ordered another 5 band antenna from HyEnd. I used it for the first time over the past weekend during Field Day. It performed excellently for voice and digital.

For portable use, I mounted the match box on a steel tripod (the type auto mechanics use to support a light bar). This keeps the match at about 6 ft. For the tall end, I use a 31 ft. telescoping fiberglass kite pole. The 5 band model has a trap coil for 80 meters that, while not heavy, will make the pole bend a bit. I ended up slipping the coil over the upper section of the pole. It slides down to about 2 ft or so from the top. I then run the short (8 ft or so) 80 meter wire to a 2mm diameter line that gets anchored to the ground, in line with the rest of the radiator.

The arrangement goes up very quickly and, worked very well on 80-40-20-15-10 with no tuner needed. (17 and 12 require some tuning as the swr is a tad above 2:1.)

I won't part with my PARs as they are superb lightweight single band antennas but the HyEnd is my favorite solution where flexibility is needed.
K8DSS Rating: 5/5 May 8, 2014 08:16 Send this review to a friend
Impressed with Multiband HyEndFed  Time owned: 0 to 3 months
Ordered the 4 Band model and received it fairly quickly from the Netherlands. Initial impression was very positive, quality piece of gear. I changed the 20 meter long radiator wire to #26 AWG PolyStealth wire from Davis RF. This antenna needs to be very stealthy and it turned out to be exactly that!

I installed the matching unit at the top corner support of the pool cage at about 10 feet. The radiator wire goes up and over a nearby live oak tree about 30 feet high. So, most of the antenna is a sloper.

The initial SWR was OK, but Ron said the 20 meter SWR should be lower and suggested attaching a 1 ft wire to the terminal on the matching unit. I did that and the SWR came into range - no tuner required on 40 and 20, but I do use the ATU on my K3 for the other bands. It works OK on the WARC bands, too. So far, I am very pleased. Thanks, Ron, for such a good antenna. It is every bit as good as the Par Endfedz, plus is Multiband.
F8ETK Rating: 5/5 Apr 20, 2014 12:09 Send this review to a friend
Vy good antenna  Time owned: months
I bought my 5-bands-Hyendfed dipole 2 months ago, to challenge my PAR EndFEd EF4020 (which is excellent, but just for 2 bands).

I am very pleased about the results all the more as I use it from 80 - 40 - 20 - 17 - 15 - 12 - 10 (so 7 bands...).

The product is really well made and allow me to keep in touch with my favorite bands with hard conditions (the antenna is put at 4 meters...)

Thanks to Ron who answered at every questions :)

No reason to hesitate with so good a product !


North France (ham since 1993)
S58J Rating: 5/5 Apr 1, 2014 04:52 Send this review to a friend
HyEndFed + 2W = 100+ DXCC  Time owned: 6 to 12 months
Can I say more? Antenna really works, with only 2,5W from my FT-817ND I did 107 DXCC countries so far. I was actually explaining my correspondents that I am using 5 Watts and just yesterday I realized that for the last 9 months (since I have 17m monoband EndFed) my FT-817ND power set up was only to 2,5 W. On the day of antenna setup I was up and down the garden with battery powered FT-817ND and afterwards forget to setup the rig back to 5W. Who cares, DX with that antenna and beautufull little rig is hot! Plenty of US in the long (all the way to WA), Japan on long path, Carribean DXPEDs... I only missed OC for WAC, but heard it many times. Antenna setup is vertical, you can see the photo on QRZ.COM. Well built, no issues I only needed to shorten the antenna for some 25cm (7 inch), at the top,for 1:1 SWR. You cant go wrong. I had a chance to visit the antenna producer near Amsterdam and he is very cooperative and helpful.Did I mentioned that I live in the area with a lot of rain and seasonal heavy winds? No problem with the antenna at all!


Janez, PA/S58J
Page 1 of 3 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.