- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Transceivers: HF Amateur (inc. HF+6M+VHF+UHF models) | Elecraft KX3 Help

Reviews Summary for Elecraft KX3
Elecraft KX3 Reviews: 125 Average rating: 4.8/5 MSRP: $ See Desciption
Description: Elecraft KX3 QRP Transceiver

Ultra-portable, all-band/all-mode high-performance transceiver for home, mobile, or field use.
* 160-6 meters (2 m with KX3-2M module)
* SSB/CW/DATA/AM/FM modes; 10 W+ PEP (100 W with KXPA100 amp)
* 1.7" x 3.5" x 7.4" (4.3 x 8.9 x 18.8 cm); only 1.5 pounds (0.7 kg)
* Current drain as low as 150 mA; internal battery (8 AA cells, any type)
* Advanced DSP provides dual watch, noise reduction, noise blanking, autonotch, stereo audio effects, audio peaking filter (APF)
* Software-defined radio (SDR) architecture plus optional roofing filters
* Operates in data modes (PSK31/RTTY) with or without a PC
* Includes RX I/Q sound-card outputs; works with PC RS232 or USB ports; free firmware upgrades
* Options: internal wide-range antenna tuner (KXAT3), interal NiMH battery charger (KXBC3), dual roofing filter module (KXFL3), attached high-performance keyer paddle (KXPD3), internal 2-meter module (KX3-2M), MH3 compact hand mic with UP/DN buttons, KXPA100/KXAT100 100-W amplifier and ATU

$999.95 factory assembled, $899.95 kit

Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Elecraft KX3.

Page 1 of 13 —>

W4RQ Rating: 5/5 Feb 17, 2015 07:37 Send this review to a friend
A different look  Time owned: more than 12 months
The weakest point of this radio is Audio. The radio is made for headphones, Dont skimp here,, get a good set and do this radio justice. I chose Bose over-the-ear and am glad I did. The KX-3 receiver will match any QRO rig out there, so get a good pair of stereo headphones. I also built a Hard Rock 50 Amp which works seamlessly with the KX-3 for those times when QRP is inappropriate, and for running Digital modes. I also use the Win4K3Suite software, Altogether this makes an awesome package for RTTY & PSK31 as well as CW and SSB.
VE3FLT Rating: 5/5 Feb 12, 2015 06:55 Send this review to a friend
Excellent quality and performance!   Time owned: 6 to 12 months
Love Qrp and versatile portable operations. Also own a Elecraft K3 Yaseu FT 817, Ten Tec Argo V1.
The KX3 is a true delight to operate.
Elecraft is a model North American Company for Innovation, Customer Service, and Quality!
WA2TPU Rating: 5/5 Feb 9, 2015 11:42 Send this review to a friend
BEYOND WOW!  Time owned: more than 12 months
I've owned my KX3 for a couple years now. I previously stated herein this review forum that it was the BEST rig I had ever owned. Sincerely those are FACTS and has not changed. Now a update, the KX3's PERFORMANCE IS ABSOLUTELY BEYOND ANYTHING I'VE EVER EXPERIENCED. PERIOD!!And I've been a ham for many decades.MY KX3's TRULY SUPERB UNBELIEVABLE FILTERING IS SO FANTASTIC IT ALLOWED ME TO FIND OPEN SLOTS IN THE AWFUL NASTY TERRIBLE PILE-UPS OF THE K1NAVASSA DX-pedition. Don't believe me? I'm in their Logs on 3 different bands using SSB Qrp.
KJ4FGI Rating: 5/5 Jan 26, 2015 21:36 Send this review to a friend
Fantastic/Great Customer Service!  Time owned: 6 to 12 months
I purchased the KX3 because I wanted a QRP radio that I could travel with and self powered. I read a lot of reviews on other radios, I wanted an American made radio.

The reason I chose this radio: Reviews on Customer Service (which I have had interactions with and they are Outstanding! A++), Software upgradable and it does it automatically, General Receive straight thru 30Mhz, Self Powered, Auto Antenna Tuner, Dsp. I purchased the KX3 with ATU, Internal NiMH Charger / Real-Time Clock,Simple 49.380 MHz Signal Source, Roofing Filter, H3 Microphone, Heil Headset, Male-Female Right Angle BNC, "The Elecraft KX3" by Fred Cady.

I have to say, I'm very happy with the KX3 and especially customer service something that's disappointing with Japanese radios. It was expensive but you pay for what you get and the internal parts are American made which is better quality than foreign components, Much better.

I did wait a while before writing this review because I wanted to write a fair review. The image rejection is great, I was having a QSO and there was another station with an amp splashing on my conversation, the KX3 was able to block the noise out, wow, I'm impressed.

I've had a Kenwood TS-440sat, I still have an Icom 706MKIIG fully loaded and I had a TS-520, the KX3's filters are fantastic especially because you can adjust them.

I could keep writing but I think you know how I roll with this radio.
Listen, Buy American! My next radio will be the K3 after I buy the 100 linear amp for the KX3.

Again Customer service is the BEST and that's what we Hams like, SERVICE! Amen!

Eddie KJ4FGI
W1XV Rating: 5/5 Dec 11, 2014 09:15 Send this review to a friend
Many feataures per cubic inch  Time owned: more than 12 months
The KX3 is a bargain when one considers the number of features packed into 18.36 cubic inches!! This transceiver does it all. You can pick the options that you want. Elecraft service, should you need it, is second to none. The folks at the "factory" do listen to those who own their products and take any and all suggestions and complaints seriously.

It's an outstanding QRP rig that is perched at the top of the receiver spec charts even when compared to today's choices of QRO transceivers.

All of the great features of the KX3 have been previously touted so I'll leave my review short and sweet. I have worked the world with the KX3 and a 135 foot dipole.

Thanks Elecraft for another superb product!!
VE7HJ Rating: 5/5 Dec 5, 2014 19:40 Send this review to a friend
KX3 & Bob Nagy Mic  Time owned: 3 to 6 months
I love my KX3 which I have owned for 4-months or more. I did not order the Hand Mic from Elecraft. Instead I use a David Clark headset which has been modified by Bob Nagy who changed out the Element with one that he tested. Man what a big difference.
I can set the KX3 Mic gain at 12 and drive the ALC 6-7 bars. I don't run any compression.

Here is a link to his web page.

Tell him James VE7HJ sent you.
AA1QG Rating: 5/5 Nov 17, 2014 07:29 Send this review to a friend
Near perfect radio  Time owned: more than 12 months
I use the radio with the PX3 and KXPA100 as the main rig, with the Flexradios and the IC-7600 now in the closet. Love the quiet receiver and sharp filters. It is a pain to listen to the hiss in a non-DSP receiver after being spoiled by the KX3.

Now if they only could add SSB squelch, a more aggressive speech processor, the ability to define special CW characters and maybe even developing a more rugged and splash proof model..
KB3RUN Rating: 5/5 Nov 4, 2014 13:27 Send this review to a friend
Excellent Radio  Time owned: 0 to 3 months
I recently acquired a used KX3 loaded with all the options except the 2M module. I have been totally impressed with its RX/TX capabilities.
I use it side-by-side with my FT-817ND and this radio is equally good. Some of the additional features I use are the PSK decode/RTTY modes.
It is an all-in-one radio and can easily be carried around on travels.
I now look forward to owning the KXPA-100 amplifier so that I can get rid of my IC-7000.

If you are considering this radio, you will not be disappointed.
K6YLG Rating: 5/5 Nov 4, 2014 07:37 Send this review to a friend
Outstanding, but not cheap  Time owned: 0 to 3 months
I've long been a QRP fan and have built a number of low-power rigs including Elecraft's KX1. The KX3 is definitely the Cadillac (Mercedes?) of QRP, with specs to match all but the most expensive transceivers. The panadaptor is far and away the best out there, and something I now couldn't live without.

While outstanding the KX3 isn't cheap; with the built-in ATU it's more expensive than a very good 100W transceiver. And if you add on the panadaptor and the KXPA100 linear you'll wind up paying 2-3x what you'd pay for an integrated xcvr with comparable specs. They're all exceptionally well engineered units, but they don't come cheap.
ON6KE Rating: 5/5 Sep 13, 2014 13:06 Send this review to a friend
KX3 ATU  Time owned: 0 to 3 months
My TS-990S ATU can't tune the 16,5m long wire with 9:1 balun I have on 160m, the KX3 however has ZERO problem tuning the wire to 1:1, HA!!!!
Page 1 of 13 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.