- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antenna Switching, Phasing, Controllers | 4O3A SAC X Stand alone antenna controler for 21 antennas Help

Reviews Summary for 4O3A SAC X Stand alone antenna controler for 21 antennas
Reviews: 2 Average rating: 5.0/5 MSRP: $check website
Description: Very versatile antenna switching system. Allows you to easily switch single
antenna's, stacks, bandpass filters and more.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the 4O3A SAC X Stand alone antenna controler for 21 antennas.

PD2R Rating: 5/5 Apr 30, 2013 09:09 Send this review to a friend
Great system  Time owned: more than 12 months
After one year of using this system, we are still very pleased with it. It still functions flawlessly and it made life much more easy for us.
Thank you Ranko for this fine product.

73, The PI4DX contest crew.
PD2R Rating: 5/5 Apr 28, 2012 15:15 Send this review to a friend
Made switching much easier  Time owned: 3 to 6 months
Once your getting serious in contesting you want the ability to switch between more and more antenna's. At one point we had so many switches it became hard to remember which switch switched what. Especially in the heat of a contest this became a problem.
During our search for a solution we found the SAC X system from 4O3A. We contacted Ranko to obtain additional information about the system before we decided to purchase it. Ranko was very helpful and took the time to answer all of our questions.
We already had 3 WX0B stack matched which we intended to use with the SAC X system. Ranko ensured us that this could be done with some minor modifications.
In addition of the SAC X system we also purchased 3 4O3A Power Splitter/Stack Matches.
When we installed the system we ran into some problems which had to do with the WX0B switches. We might have been able to overcome these problems but we decide to go for the easy solution and keep the WX0B switches as spares and purchased 3 more 403A Power Splitters. After we had installed the new Power Splitters the system worked without any problmes. Unfortunately we still were not able to use different antennas for transmitting and receiving. For this we had to build in some delays to provide the system to switch the antenna before the RF power comes on or off. With the help of Microham Micro Keyers we were able to do just that and we were able utilize all the capabilities of the system.

This system has very much simplified the switching of all our antennas. Even our guest operators find this system easy to use.

Ranko has been very helpful during the installation of the system and we could recommend this system to every one who wants to simplify there antenna switching.

73, the PI4DX contest crew

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.