- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Filters, Audio: (DSP and others) | MFJ-722B Help

Reviews Summary for MFJ-722B
MFJ-722B Reviews: 1 Average rating: 4.0/5 MSRP: $99.95
Description: Op amp-based audio filter (FILTER, CW/SSB AUDIO FILTER, NOTCH, AMP)
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the MFJ-722B.

WB1AAL Rating: 4/5 Feb 7, 2013 17:29 Send this review to a friend
Lastest Addition to MFJ Audio Processor Line  Time owned: 0 to 3 months
More MFJ gear seems to be finding its way into my shack. I know that there are quality control concerns with MFJ, but their gear has managed to fill some of the gaps left by the departure of Heathkit and others from the ham radio market. That alone makes MFJ gear an attractive addition to my shack.

The most recent shack addition is the MFJ-722B "Optimizer"--and name clearly borrowed from the Heathkit folks (e.g. the Heathkit "Microlizer.") Basically, the MFJ-722B is the most recent rendition of the MFJ op amp-based audio filter. It is useful with vintage rigs from the pre-DSP era--although the MFJ-722B can also be used injunction with a DSP rig.

In my shack this is the latest in a line of aftermarket audio filters looking to assist my Kenwood TS-430S in ferreting the signals out of the noise and QRM. Preceding it was a Heathkit HD-1418 Active Audio Filter and the Autek QF-1A audio filter.

On the pro side:

* It works well especially in reducing QRM and atmospheric noise

* It has an all metal case (the earlier MFJ-722 units [pre B] had plastic in their cases)

* I find it more intuitive to use than either the HD-1418 or Autek QF-1A

* It supports a notch filter, a notch filter with HP filtering, a notch filter followed by HP and variable LP filtering for SSB and CW. Very logical.

* It is smaller in size than either the HD-1418 or Autek QF-1A

On the con side:

* It came out of the box with a noisy pot (contact cleaner session coming up!)

* It doesn't have enough power to adequately drive my RCA PRO-X33AV speaker--something that the Heathkit HD-1418, Autek QF-1A or even the Kenwood TS-430S can do with ease. (This con was overcome by the addition of a spare Heathkit AA-18 mono amplifier placed after the MFJ-722B. But that's yet another piece of gear taking up space on my ham shack desk and sucking power from my AC line.)

BTW, although the instructions are decent, don't even try to read the schematic diagram in the manual. It is reduced to a tiny size and nearly impossible to read. I've mentioned this before in other vendor equipment reviews and it will be repeated here. Hams are generally technically oriented folks. Vendors should include schematics with their devices--but PLEASE MAKE THEM READABLE!

If you think I was shouting that last part out, you are entirely correct!

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.