eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Amplifiers: RF Power - 6M/VHF/UHF+ | Gemini 23 Linear Amp Help


Reviews Summary for Gemini 23 Linear Amp
Reviews: 2 Average rating: 5.0/5 MSRP: $approx 1100 Pounds
Description: 1296mhz linear amplifier
Product is in production.
More info: http://www.thedxshop.com/linear-amp-uk-linear-amplifiers/linear-amp-vhf-uhf-amplifiers.html
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Gemini 23 Linear Amp .

WP4O Rating: 5/5 Feb 1, 2016 07:12 Send this review to a friend
excellent  Time owned: more than 12 months
I currently own 3 of the Geminis sold by Roger at the DX SHOP in the UK, they are flawless. very quite, I own the 144/432 and 1296 one these are great medium power AMPS, I drive these with my ANAN Sdr Radio and Khune Transverters
 
N2SLO Rating: 5/5 Oct 27, 2015 14:33 Send this review to a friend
Perfect for my needs  Time owned: 0 to 3 months
I was in need of a 1296mhz amplifier. Choices are limited- Beko makes a 400 watt and an 800 watt which are built like tanks but cost $$$$$$$$$$$. I found Gemini- made in the UK. The DX-shop in the UK carries a full line of VHF/UHF amps. The Gemini 23 is rated 200 or so watts with 8 watts in. This amp is perfect for my Icom 9100. The amp works well- audio and signal reports are a big improvement with 125-150 watts vs. 6-8 watts. Only improvement would be to change the over the coax voltage set up. You can run 13.8 over coax by configuring a 6 pin mini din connector- attaching to an ACC1 socket on the back of the amp and hitting the preamp switch on the front panel. I tried to solder up the connector - brutal, and I gave up. I configured a direct voltage feed to my mast mounted SHF pre-amp, with monster cable (RCA) and RG58. The direct voltage works great. In summary, a very good plug and play solution. Roger at the DX-shop is a professional- and provides excellent customer support.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.