|
New to Ham Radio?
My Profile
Community
Articles
Forums
News
Reviews
Friends Remembered
Speak Out
Strays
Survey Question
Operating
Contesting
DX Cluster Spots
Propagation
Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers
Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net
|
|
You can
write your own review of the Elecraft K1.
|
N7KFD
|
Rating: 5/5
|
Apr 14, 2009 17:04
|
Send this review to a friend
|
|
Fun!
|
Time owned: 6 to 12 months
|
|
I really like this radio! It was easy and fun to build and, as others have said, it's exciting to use a rig you built yourself. I bought all the bells and whistles, save the battery pack, and am glad I did. I really like the adjustable filters, the noise blanker works great as does the antenna tuner and keyer and the ease of changing keying speeds is just another bonus. This little radio is packed with great features and it's easy to work on if you ever needed to. I built mine last September (2008) and I'm really looking forward to bringing it camping this summer.
|
|
KA9HJZ
|
Rating: 5/5
|
Apr 5, 2009 18:03
|
Send this review to a friend
|
|
good litlle rig now
|
Time owned: more than 12 months
|
|
Ok. After rereading the operating manual several times and working with the K1 for several days and making quite a few contacts. I have changed my mind. I have a good handle on how to use the menue and pretty well figured it out. The receiver sounds great and the tuner is working really great and puts out over 5 watts power useing my full size G5RV inverted Vee antenna.I am using a 12 volt 3.3AH battery and it has held 12.2 volts for 3 days of operating. I tried a battery pack i made with 8 rechargeable 1.2 volt 2100 Mah batteries and charge up to about 10 volts it dropped to 9 volts after one QSL. now i am a happy old ham.
|
|
KA9HJZ
|
Rating: 4/5
|
Mar 20, 2009 08:04
|
Send this review to a friend
|
|
good little rig but i'm to old
|
Time owned: more than 12 months
|
|
disregard the low rating. Part of the problem is me.to many bells and whistles for me.I like it but don't use it enough to remember all of the functions. A young person with computer savy will have no trouble. The controls have to many functions. I have to read the manual everytime i use it.I keep going back to my Ten Tec Paragon with QRP capabilities. turn it on, tune it and send.Being 71 years old doesn't help.All in all it works like it should and i have had contacts on it.I also had a Heathkit HW 9 with a matching tuner i built and liked it more. wish i never sold it to buy this one. I had a master builder do this k1 for me.
|
|
EA5BLP
|
Rating: 5/5
|
Jan 10, 2009 21:27
|
Send this review to a friend
|
|
innovative kit design
|
Time owned: months
|
I have buit the K1 and it works very well. Itīs more than you can expect if you have some experience on electronics or as a ham radio kit builder. At the begining i thought that the cost was expensive, but after working on the circuit I understood why. I have built the heathkit SB-104,the ten tec 1330 (another great kit), some Spanish kits of the 70-80 years, and rebuilt a heathkit HW-9. Apart from this, i have home made lots of artifacts, like antennas couplers, linear amplifiers, cw electronic keyers ... Each one has his personal touch and his feeling. But the K1 is a steep ahead because it has a very inteligent design perfectly integrated on actual technology and an accurate final performance, very closed from you can expect of a comercial designed rig. It drifs? Yes, a litlle bit. As all rigs with VFOīs controled by varactors, homemade coils and condensers. But it doesīnt matter for a normal QRP operation on cw. If you center your atention on having fun of the radio-activity, you will not realize any kind of drift... Itīs possible to work dx? Yes, it is, if you apply the common sense rules for QRP job. Itīs a kit for beginners? I would say not, but it depends what we understand for a "beginner". (There are different kinds of beginners, and those of them who pay atention and want really to learn and study, will have success..)The handbook is very well explained and all compomemts are of a great quality. But the circuit will be really problematic or complex for a beginner if this is his first kit and he knows absolutly nothing about electronics and components. The general idea of this kit is really innovative and very enjoyable when you work on it with the soldering iron. Otherwise, the exterior appearence is very, very nice. Said this, i think itīs not the perfect rig for portable, due to itīs fragile box. But itīs a minor question when you compare it with the surprising results of itīs performance.
|
|
W5YDM
|
Rating: 4/5
|
Dec 11, 2008 17:49
|
Send this review to a friend
|
|
update
|
Time owned: 0 to 3 months
|
|
I've had my K1 long enough now to add an update. My K1 drifts, and from what I can tell from reading the K1 reflector reports, most owners have a drift problem. Today I turned my K1 on and set the display to 14030.0 and then didn't touch it for 2 1/2 hours. The first hour it went down to 14029.6 and at the end of 2 1/2 hours it was down to 14029.1. That's a little over 400 Hz per hour untouched, which is excessive, in my opinion. While actually using the K1 in a qso, the drift could be more or less. My drift has been confirmed by other stations. I've put the dremel felt pads behind the VFO knob which made it nice and tight. I don't know if that will help but at least it is now stiff enough to resist bumping.
|
|
WB0OEW
|
Rating: 5/5
|
Sep 19, 2008 15:24
|
Send this review to a friend
|
|
I like my K1 a lot
|
Time owned: 0 to 3 months
|
I built K1 S/N 02594 last month. It took me about 30 hours including tuning. It worked immediately as advertised, no problems at all.
Construction was mostly straight forward -- all parts were included, nicely packaged, most were well marked and instructions mostly clear. Only time of confusion was the LCD backlight which did not seem to quite match the directions and took a little imagination to work out. The actual winding of the toroids was not a problem for me but it was a bit of a struggle sometimes to get all the enamel stripped off correctly. I burned each end with a Bic lighter then finished with sandpaper.
RX tuning was done with on-air signals, including calibrating the frequency to W1AW. TX tuning was done using their DL1 dummy load and RF detector (also recommended if you don't already own something similar). VFO adjustment was the hardest procedure. I ended up having to remove L1 and remove one turn to bring the VFO into range (the instructions do describe this possibility). I chose the wide VFO range and get about 180 kHz coverage. This makes tuning a bit touchy but for me is an acceptable tradeoff to get access to the entire CW band.
Only mods were changing C31 to 1 uF for faster AGC attack (important for headphone use) and the one on their web site improving QSK performance (220 ohm and 22 uF in series from Q11 drain to ground). I also added a layer of felt behind the main tuning knob, otherwise it turns so freely I tended to bump it when clicking the RIT on and off.
I have the two band version and chose 40 and 15m. So far I have worked 20 states on 40m, no contacts yet on 15m. RX seems to be quite sensitive and low noise; often get comments that TX is very clean and "doing a great job". Antenna is Ventenna HFp vertical (which I also like but that's a different review). I do not have the built-in tuner but you'll need some kind of tuner if your antenna does not present SWR of 1.5 or less; anything higher and your power output will drop substantially.
I did buy the tilt stand which I like and the finger dimple which I don't. The main knob is too small for effective use of a dimple.
For power I use a small 12V 84 W-Hr gell cell battery with which I can operate a week of evenings between charges. The K1 includes a battery voltage display so there's no need to guess when your battery is getting low. Your mileage will vary depending on proportion of time spent transmitting. My K1 draws about 70 mA RX, 850 mA TX. The manual says 55 mA RX when no signal is being received and probably with no backlight option and neither LED on.
I use an iamblic keyer. The menu system allows you to swap dit-dah sides, use A or B completion modes, or use a straight key. You can record and play back (transmit) two recorded messages up to 90 seconds each.
The menu system is remarkably flexible. It is easy to use after you catch on to the pattern of how to step through the menus. You can change the output power (clear down to 0 in fact for practicing your keying using the sidetone); adjust volume and pitch of your desired sidetone (although if you change pitch more than 100 Hz or so you should retune TX offset too); change QSK time; set the three RX filter bandwidths (between 200-900 Hz); turn AGC on or off; choose between LED or audible function feedback; and several entries used during the alignment procedures. You can give up the XIT function and make that button be a shortcut to any one menu item; I use it to go to the sidetone pitch entry which effectively gives me a 1-button "spot" method to hear my reference tone against which to beat a prospective station frequency.
I like my K1 a lot. It is effective, efficient and fun to use.
|
|
N2DTS
|
Rating: 4/5
|
Feb 18, 2008 07:05
|
Send this review to a friend
|
|
cute little radio
|
Time owned: 0 to 3 months
|
I got the kit Thursday, it was done Saturday, no missing parts, easy to build, great manual, I did not do the resistance checks, or the inventory, I never do with Elecraft kits, and they always work.
If you can solder well, all the Elecraft kits are a snap, although the K2 takes a good amount of time to build....
The K1-2 (80 and 40 meters) I got workes well, I built it with the wide VFO range which tunes from 6.995 MHz to about 7.2 MHz, and tuning is a little fast but fine for me.
I like being able to cover the old novice bands.
The rig seems very stable, the filter works very well, receiver noise is moderate to low, you have way more than enough audio output.
Alignment was easy and quick, most adjustments needed VERY little tweaking!
The QSK and sidetone are tops.
While it is a great rig for its size and price, it has some bugs:
The audio based AGC works poorly with headphones, blasts of LOUD tone on strong signals are very anoying, and strong signals can desense the receiver for up to 10 seconds.
I changed the AGC cap from 2.2 to 1 UF and plan on trying less.
The loud blasts do not seem to be as much of a problem with the speaker.
The S meter is worthless, its so slow that it never reflects the actual signal strength.
Since Elecraft uses a voltage only measurment for power output control, you get low power with anything over a 1.2 to 1 swr.
The optional antenna tuner fixes that most likely.
I sure wish they used enough digits in the display to show the frequency. They could have been smaller if need be...this and the audio AGC really bug me. Just 2 more digits and you would have had a good readout....
While the K1 was likely designed to be carried to the top of some mountan, everything Elecraft makes is designed to do the most with the absolute least buttons, knobs and displays, and that can annoy one after a while.
They get such great performance out of every radio they make, and then half ruin it with their highly compressed control setup.
The KX1 has 4 knobs,
the K1 has 3 knobs,
The K2 has 6 knobs,
the K3 has 11 (some dual).
If Elecraft ever decides to make a rig that was NOT designed to backpack up the Matterhorn, and it has lots of knobs and displays, it would likely be the best radio ever made for ham shack use.
As it is, the K1 is very good, and I plan on using it in the den to copy CW while the XYL watches TV, its small, and with some batteries inside it will work weeks (on rx) before needing a recharge.
Once I get my speed up, it would be fun to take the K1 up the Matterhorn, but the K2 would do better and is only a little bigger.
Brett
N2DTS
|
|
AB4BC
|
Rating: 5/5
|
Aug 5, 2007 18:22
|
Send this review to a friend
|
|
A beauty to operate and a joy to build!
|
Time owned: 3 to 6 months
|
The K1-2 was the 5th Elecraft kit I assembled. I wouldn't recommend this kit to be your very first construction project but it wasn't overly complicated. I assembled mine in less than 28 hours....and I can honestly say that this was straight time with no stopping. Nearly blind and exhausted after assembly and thorough alignment, I soon was making contacts on 30m. I plan on assembling another one very soon just for the fun of it. My K1-2 consists of the 80m and 30m kit....in hindsight, I would have built the 4 band module first and added 80/15m in a seperate module.
If you are planning on building one, please feel free to contact me at rcave8@msn.com for a few build tips I strongly recommend. Please purchase all internal options that you know you will use before you start building the main unit. It will be so much easier and you will not have to crack open the case again once completed. =)
|
|
WA6L
|
Rating: 5/5
|
Jul 5, 2007 14:06
|
Send this review to a friend
|
|
Inspirational
|
Time owned: 3 to 6 months
|
You really need to review to two aspects of this radio: the K1 as a kit and the K1 as a transceiver.
For me, the kit can best be described as "inspirational." I hadn't built a kit for over 20 years, but this one was so well designed, so meticulously documented, and so enjoyable to put together that it inspired me to get a K2, and now I have just ordered the KPA100 100-watt upgrade kit. It is an incredible feeling to power up a rig that you built and make that first contact.
As a transceiver, it is a gem. Great receiver sensitivity and excellent signal reports. Four bands, selectable filtering, built-in memory keyer, and a built-in speaker -- all in a package small enough to fit in a lunch-box. With the built-in ATU, all you need is a key and just about any antenna and you are on the air.
I don't think that this could be my only rig, but it has become one of my favorites. I used it during the last Field Day to make over 75 contacts in 8 hours from a remote location on battery power. It shines as a portable rig; drawing only 55 ma on receive and 800 on transmit. You can literally run it all day on a 7ah Gel Cell.
I never knew that QRP and remote operation could be so much fun! The K1, both as a kit and as a transceiver, has been one of my best experiences in Ham Radio.
73,
John, WA6L
|
|
LX1LH
|
Rating: 3/5
|
Jun 22, 2007 06:20
|
Send this review to a friend
|
|
Easy to build - superior rx - awful usage
|
Time owned: 6 to 12 months
|
|
I had one myself, I build another one for a friend, easy to build. You get a very good transceiver - not only for portable - but with one caveat: How this thing is to be used is horrible, especially with the ATU in it. You need the manual close at all times - you expect from a small CW TRX easy usage ... cannot be said and usability is 50% of the game in my oppinion. SOLD !
|
|
If you have any questions, problems, or suggestions about Reviews,
please email your Reviews Manager.
|
|
|
|
|
