- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: HF: Verticals; Wire; Loop | LNR EFT-MTR Help

Reviews Summary for LNR EFT-MTR
LNR EFT-MTR Reviews: 2 Average rating: 5.0/5 MSRP: $84.95
Description: An end-fed wire for 40/30/20m
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the LNR EFT-MTR.

WB0WQS Rating: 5/5 Jul 5, 2016 21:40 Send this review to a friend
Great portable antenna  Time owned: 3 to 6 months
I don't usually buy commercial antennas, although this time I read some really good reviews and heard some good on-air comments about this antenna. It is the entire package, comes with plastic winder to roll up the antenna and coax(rg-174) to keep it organized and store it between adventures.... It tuned up fine for 20 and 40 first time out with no adjustments or tuning ...I used it with a 31 foot fiberglass pole and as kind of a L configuration set up at the picnic table. And I felt like stations were hearing me quit well for qrp. The next deployment was field day 2016 --- It was hung from a very tall tree in almost a vertical fashion. Worked 174 contacts on 20 and 40 meters mostly CW 5 watts in pretty unstable conditions that were up and down all weekend. Most the time, the response was great and the number of contacts tell the story. I had limited hours on the air but felt pretty good about the results. I give this product the nod, and would purchase other LNR products.
K5TTE Rating: 5/5 Apr 22, 2016 13:19 Send this review to a friend
Another LNR winner  Time owned: 0 to 3 months
I hoisted this antenna straight out of the box, expecting some trimming to get decent SWR on all three bands. I connected the 25 ft RG-174 coax and my MFJ analyzer.
The proximal end (with the matchbox) was at about 7 ft and the distal end was about 20 ft, entirely in the clear.

Trimming the wire for good SWR on all 3 bands?
Not needed! Zilch, Nada!
7.050 ---- 1.4 to 1
10.118---- 1.4 to 1
14.040--- 1.5 to 1

I've purchased EFHW wires over the past 3 years,
and all of them required just a bit wire tweaking, resulting in quite satisfactory SWRs.
But this new EF-MTR needed no adjustment at all,
except for the removable Pigtail on the coil.
For 30m: no pigtail. For 40/20: add the pigtail

Of course YMMV, particularly if you go with an inverted "L"
or inverted V. But as a simple flat-top, this is a remarkable item unmodified.
It's a perfect match for my new Mountain Topper rig.
If there's a radio company more helpful than the LNR folks,
I've yet to find it.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.