eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Interfaces, Radio to computer, amp, rotor, coax switch, internet | Yaesu Wires-X HRI-200 Help


Reviews Summary for Yaesu Wires-X HRI-200
Yaesu Wires-X HRI-200 Reviews: 2 Average rating: 5.0/5 MSRP: $124.95
Description: The Yaesu WIRES-X HRI-200 (Wide-coverage Internet Repeater
Enhancement System) enables Internet to RF communications that
expands the range of amateur radio using internet enabled Voice-
over-IP technology. With WIRES-X, an amateur node station
connected to the Internet and Interfaced to the WIRES-X HRI-200
unit can communicate using VoIP over long distances reliably with
ease.
Product is in production.
More info: http://https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=249&encProdID=1D23D01F7B34D76072988D9857AA1A7C&DivisionID=65&isArchived=0
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Yaesu Wires-X HRI-200.

N0AN Rating: 5/5 Nov 24, 2016 03:22 Send this review to a friend
Excellent Wires-X Interface  Time owned: 0 to 3 months
A very nice and excellent interface for Wires-X radios like the FTM-100 and FTM-400.

The setup is easy, to be sure, BUT there have been problems installing the drivers on some Win10 computers. I tried it and failed on two HP Quad Cores, but they installed first try on my HP Laptop Core Duo.

Here is the cure for "Driver Won't Install" Issues:

If you try to install the drivers, when you click the box to do so, you will see a rapid box flash and the message "Connect the HRI-200". This, of course violates the install instructions that say "Do NOT connect the HRI-200 until the drivers are installed!" (and they could not have installed in a flash that fast. You can confirm by looking for new ports in the Device Manager.

Solution:

Go ahead and connect the USB cable from the HRI-200 to your computer. It will install the Microsoft drivers, which of course, won't work.

Then:

Go to Device Manager, find the port that was installed with the wrong drivers (it will be a generic port). Highlight that port, right click on it, and select UPDATE DRIVER.

Tell it you Have Disk, then point it at the location of your install disk or install software (if you downloaded it) and let it update the driver...it will replace the generic Microsoft driver that won't work, with the HRI specific driver that works just fine.

Finish the setup and away you go!

Since getting past the install issue, performance of the HRI-200 with an FTM-100 as the node radio in Wires-X mode has been remarkably solid. No hangs, no spontaneous reboots, no crashes. Very, very well done, Yaesu!

Having your own node for either analog or digital (mine is digital) is a real treat! I can access the Wires-X world wide network from 25 to 30 miles away with the FTM-400 in my car, or from 8 miles away with my FT1-XDR HT using a stub ducky and 5w. Very impressive!
 
G8UBJ Rating: 5/5 Aug 17, 2016 23:34 Send this review to a friend
Easy to set up  Time owned: 0 to 3 months
I finally took the plunge with Yaesu's C4FM and haven't been disappointed. There are no nodes within easy reach of my QTH so I registered with Yaesu and had my own set up very quickly. Only snag I encountered was the need to manually open port forwarding on my router but once this was done it worked out of the box. In the UK we are not allowed to re-broadcast Wires-x without a permit (NOV). I applied for one and it came very quickly so now I have a UHF Gateway set up for SW London - MB6ISR on 434.5125Mhz

Yaesu have built a successful integrated Voice, data and internet solution which is easy to set up and use.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.