- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antenna Rotators & Accessories | Unified Microsystems ML-6 LED Rotor Meter Light Help

Reviews Summary for Unified Microsystems ML-6 LED Rotor Meter Light
Reviews: 1 Average rating: 5.0/5 MSRP: $(missing—add MSRP)
Description: "Solid State replacement for the incandescent am light
illuminating Hy-Gain HAM-M, HAM-IV Etc, and CDE HAM-M type
rotor control boxes.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Unified Microsystems ML-6 LED Rotor Meter Light.

K7HV Rating: 5/5 Aug 24, 2016 15:52 Send this review to a friend
Great solution to bulb burnout  Time owned: 0 to 3 months
The last time the incandescent bulb was replaced in my CDE rotator control box meter, it lasted about a year and put out so much heat it started to melt the top of the meter housing. I found a single LED plug in lamp to replace it, but found I could only see it if all my shack lights were out. I would often leave the box powered up because I could not tell when it was off. Enter the ML-6: for $20 (incl. USPS Priority shipping) I received a small PCB/LED strip with two wires attached. Following the simple instructions, I placed it on the top of the meter with self adhesive velcro, soldered the wires to the tabs on the lamp socket and adjusted the brightness with a trimmer screw... a half hour job. I now have a bright rotator display even when the sun streams into the radio cave window. VFB.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.