eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Transceivers: VHF/UHF+ Amateur Base/Mobile (non hand-held) | Wilson WH2510 / 2516 Help


Reviews Summary for Wilson WH2510 / 2516
Wilson  WH2510 / 2516 Reviews: 1 Average rating: 3.0/5 MSRP: $400.00USD
Description: Early 1980's VHF commercial rig that was considered cheap for its time. RX sensitivity = .3uV, TX RF OUT = 20W. Programmable via front 45 degree slanted keypad and an internal jumper. There are two versions, WH2510 = 10 channel and WH2516 = 16 channel. There is also a Regency brand of this rig, (Model # escapes me. RH-256?), and a UHF version as well.
Product is not in production.
More info: http://www.wb6nvh.com/RH256.htm
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Wilson WH2510 / 2516.

N2MDV Rating: 3/5 Jan 12, 2017 08:42 Send this review to a friend
Cheap for its time, but versitile.  Time owned: more than 12 months
When I did Ebay I bought a whole box of these rigs for cheap. Yeah, not the most sensitive RX on it, and programing FREQ's and CTCSS is a bit combersome, but very doable. Goto http://www.wb6nvh.com/RH256.htm to see how. Transmitter and receiver need to be tuned up to where you want them to operate. If you want 2M, you have to tune up RX and TX for that portions. You want 156MHz Marine band, same deal. So not a good wide-band rig at all. Audio quality on RX and TX is incredible! That top mounted 4" speaker is loud and proud, (The best internal speaker in a rig I've ever heard.), and the large PM mic with DIN twist-lock connector gives this rig great TX audio. When taking rig apart, be vary careful of keypad ribbon cable, very fragile. If you find one of these rigs for under $20.00, worth it, if you can spend the time to tune it up for 2M, or where ever you want to go. A 5mm white LED for the keypad, to replace wheatbulb, gives that keypad a nice cool white look. As a main rig? No, but a nice back-up, or starter, rig to have.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.