- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Receive Accessories | DX Engineering Receiver Guard Help

Reviews Summary for DX Engineering Receiver Guard
DX Engineering Receiver Guard Reviews: 1 Average rating: 5.0/5 MSRP: $$75
Description: Receive only front end protector.
Product is in production.
More info: http://
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the DX Engineering Receiver Guard.

K4TB Rating: 5/5 Mar 4, 2017 17:33 Send this review to a friend
Works Great!  Time owned: 0 to 3 months
I put up a 12' whip antenna about 25' away from my 1/4 wave 40 meter vertical antenna. I needed another antenna for a Yaesu VR-5000 receiver and a Timewave ANC-4 noise canceller so I put up the whip. The narrow antenna separation is due to my lot restrictions. However, I was afraid of the 100 watts of RF on the 1/4 wave antenna from my Icom 7600 transceiver harming the VR-5000 and ANC-4 so I decided to try the Receiver Guard. I am pleased to say that I can transmit at full power right on the same frequency as my VR-5000 is tuned and have no problems. In fact the Receiver Guard acts just like a QSK antenna switch - I can send CW and monitor it on my VR-5000 with full break-in receive operation. No harm to my equipment. Sweet!

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.