eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Tools & Test Equipment for the amateur radio work bench | MFJ-7404 Coaxial Cable Stripper Help


Reviews Summary for MFJ-7404 Coaxial Cable Stripper
Reviews: 1 Average rating: 3.0/5 MSRP: $$19.95
Description: Coax stripper for RG8, 11, 213
Product is in production.
More info: http://www.mfjenterprises.com/
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the MFJ-7404 Coaxial Cable Stripper.

KG7OR Rating: 3/5 Aug 5, 2017 19:11 Send this review to a friend
Works well, but a few issues  Time owned: 0 to 3 months
The MFJ-7404 is a rebranded Hanlong model HT-322S. It does fine if you're experienced with coax strippers. If not, go to Youtube and watch the video by Jim W6LG, "How to Install a Coax Connector, PL259 on RG213." Jim uses the 7404 in his demo, and without it I'd have been clueless because the unit comes with no instructions whatsoever.

Issue no. 2: the stripper has two blades, but there are 3 Allen screws to adjust them (?!?). You have to figure out which one of the screws is for the blade that cuts the outer poly on the coax, which one is for the inner dielectic, and which one does nothing at all. Again, no instructions. (Watch Jim's video closely, using the pause button, and you'll see how it's done.)

Issue no. 3: if you don't get a perfect result on the first attempt, you have to adjust the Allen screws. Beware!! If you advance them too far, they will go beyond the thread and fall out. No limit stop!! You can then throw your stripper away and buy another one--the screws cannot be reinstalled.

Bottom line: works fine when it's properly adjusted. But if you're not already an expert, watch the Youtube and go very easy with the screw adjustments.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.