eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Antenna Rotators & Accessories | RF Connection RFC-2800 rotor cable Help


Reviews Summary for RF Connection RFC-2800 rotor cable
Reviews: 1 Average rating: 5.0/5 MSRP: $.80 per foot
Description: The RF Connection developed this cable to fix issues with Orion 2800 series rotors getting out of calibration from motor pulses getting in to the pulse counter. The sense wires are completely shielded with a drain wire that is to be grounded at both ends.
Product is in production.
More info: http://www.therfc.com
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the RF Connection RFC-2800 rotor cable.

W8ZN Rating: 5/5 Nov 1, 2017 10:57 Send this review to a friend
Great cable that solves the problem  Time owned: 3 to 6 months
I've been using Orion 2800 series rotors for quite some time, they are fine rotors for up to med/large arrays. The issue has always been the DC versions use a PWM scheme to control the speed of the motor and in long runs of normal cable, the pulses in the two motor wires are picked up by the two wires from the pulse counter. This causes the rotor to get out of calibration. This cable has two LARGE conductors for the motor and the two conductors for the pulse are shielded in foil with a drain wire. I've installed it in several locations where I had the calibration drift and the problem has gone away.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.