eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Amplifiers: RF Power - HF & HF+6M | Yaesu FL-110 160-10m Linear Amplifier Help


Reviews Summary for Yaesu FL-110 160-10m Linear Amplifier
Yaesu FL-110 160-10m Linear Amplifier Reviews: 3 Average rating: 4.7/5 MSRP: $free in cornflake pkts
Description: Solid state 160-10m All Mode Linear Power Amplifier
Product is not in production.
More info: http://
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Yaesu FL-110 160-10m Linear Amplifier.

DK3QN Rating: 4/5 Jul 16, 2003 17:59 Send this review to a friend
good and solid, some limitations  Time owned: more than 12 months
This little amp can easily be put into service for all HF bands including WARC. Just switch the LPF (Low Pass Filter) to the next higher band. I.e. for 10Mc operation switch it to 14Mc (20 meters), for 18 Mc operation to 21 Mc (15 meters) and so on.

If you drive it hard you can run it up to 150 watts of output or more. But I would *not* recommend pushing it that hard. The signal quality (IMD) will deteriorate plus the transistors will run near the 'danger zone', especially if you use a compressor/processor or use CW mode. BTW, upgrading from 100 to 150 watts output makes close to no difference in signal strength!

There are 2 issues which keep me away from rating it a 5/5:

1. it has got an open frame switch-over relay which is pretty slow. So you get these famous 'truncated first element' sound when operating CW. Not only when using RF-VOX (a 'no-no' for CW) but also when using PTT (PTT contact is available at the DC connector interface). This problem can be compensated if your TRX has got a provision for delaying the RF sent-out (like FT-897).

2. Mechanically, the internal construction is a little 'complex'. If you need to service or want to modify the FL-110, it takes your time to get to the area of the amp you want to touch.

Otherwise, if you are in a need to add 10 db to your 10 watt rig and you can find one at a reasonable price plus good working condition, don't hesitate.

73, Klaus, DK3QN
 
K3ICH Rating: 5/5 Apr 27, 2002 09:48 Send this review to a friend
When QRP won't quite do  Time owned: more than 12 months
This is THE perfect amp to use with your QRP field set-up when you need a tad more oomph. Since the T/R switching is RF sensed, it is transparent unless enabled, then your FT-817 or MFJ will enjoy about a 12 dB power boost. It will put out well over it's rated 100 watts and is useable down to a watt or so drive. The internal manually switched band pass filters keep the spurious emissions with-in today's specs. It's unfortunate that this amp can no longer be manufactured because of the FCC's ban on chicken-band amps, but, all of these are grand fathered in because they were made before the ban went into effect. They typically demand a premium price, and are not all that readily available, but you see one every now and then in the swap listings.
 
N2CKH Rating: 5/5 Mar 19, 2001 13:58 Send this review to a friend
Heavy Duty Amp !  Time owned: 3 to 6 months
The Yaesu FL-110, is a pre-WARC band days, solid state 15w in max, 100w plus out linear amplifier perfect for use with 10w class QRP radios. This amp originated for the Yaesu FT-7 and FT-310
the best I can determine. The unit draws 17A and full output at 13.8v D.C.

The FL-110 covers 160-10m and actually has a front panel mounted band switch. The unit is RF sensed and can be driven with as little as 1w. The unit can optionally be hardwired for relay
contact to ground or DC+ voltage keying.

I have found out that there is an input attenuator that when removed will allow 5w drive to full output. In addition it will work into a 3:1 VSWR with reduced output without destroying the PA devices, a pair of SRF1427 power transistors in a push-pull broad band negative feedback 1.5 thru 30 Mhz design

I use this tank of a brick amp with my FT-817 and yes it does work ont the WARC bands with a slight decrease in output power due to the filtering in the unit.

For photos, inside and out, user manual and schematics visit my website.

 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.