|
New to Ham Radio?
My Profile
Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question
Operating
Contesting
DX Cluster Spots
Propagation
Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers
Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net
|
| Reviews Summary for Yaesu FT-301S |
|
Reviews: 2
|
Average rating: 4.5/5
|
MSRP: $(missing—add MSRP)
|
|
Description: Late 70s QRP version of the FT-301 series 160-10m transceivers
|
|
Product is not in production.
|
|
More info: http://
|
|
Email Subscription
You are not subscribed to this review.
Subscribe!
My Subscriptions
Subscriptions Help
|
You can
write your own review of the Yaesu FT-301S.
|
W3OSS
|
Rating: 5/5
|
Jul 15, 2008 07:24
|
Send this review to a friend
|
|
Excellent & Overlooked Radio of the 1970s/80s
|
Time owned: more than 12 months
|
Over the years I have owned three (3) of these sets: my first one was purchased from Larry Bailey, G5BRB, in England in 1981. My wife provided me with the matching FV-301 remote VFO and the power supply/speaker as an anniversary gift. This "station" also boasted a matching spectral display unit and, although I have never seen one, an outboard HF linear amp (theoritically NOT a bolt-on-the-back unit used to make the 301S into a 100 W FT-301).
The receiver is adequate for it's day. Of course there are slots for installing additional IF filters inside the radio. My current FT-301SD came with the AM and 500Hz CW filter already installed. The Fox-Tango group had several very handy modsfor this rig that included replacing the RF front end device with a 3N211 MOSFET which really hotted up the receiver. I performed this mod on the original 301 that I had with excellent results. As I remember it did not destroy the dynamic range, either.
Most of these radios need a complete tune-up after aging on the shack shelf for 20 years! That is where the manual REALLY shines! The manual that acomes with the radio is an operations manual PLUS a mini-service manual! Clear, concise explanations of the various circit boards and their function/operational characteristics are included so the would-be technician can align and troubleshoot the radio if desired.
Also included within the manual is a complete parts list for the FT-301(S/SD) which is nice if you need to replace a descrete component.
Operationally the FT-301SD is a great little rig, considering that the design is around 30 years old. Adding the optional IF filters transforms this old warhorse into a respectable DX machine. True, it does not have DSP (that can be added at any time thanks to the many "kits" currently on the market).
If you want a good little bare-bones contest/DXing radio, the FT-301, set up with the proper filters and a retro-fit DSP unit would be a great choice AND not break the bank at the same time.
Do I like the FT-301? Yes, can't you tell?? This radio set is an outstanding example of the kind of engineering and design that has made Yaesu a household name within the Hallowed Pillars of the Halls of DX.
|
|
VK3YE
|
Rating: 4/5
|
Apr 15, 2002 08:17
|
Send this review to a friend
|
|
Overlooked classic!
|
Time owned: more than 12 months
|
(The following comments relate to the FT-301S, the ten watt version of the model)
This is an early all-solid state HF transceiver, perhaps overshadowed by the very popular 101 series of the time. Appearance bears a family
resemblance to the 101, though the cabinet is a
little smaller. Nevertheless the controls are
large and easy to use. This is not really a rig
for the portable QRPer seeking lightweight equipment.
The set boasts many features not found on later
budget models such as the FT-77. These include 160 metres, RF speech processor, notch filter, selectable AGC (slow, medium, fast, unfortunately not OFF) and VOX. However later rigs do have no-tune operation (the FT-301S requires peaking on each band), 10/18/24 MHz and an FM option.
Overall performance is very good. The transmit audio with the standard hand mic has always received complimentary reports. The included
RF speech processor is excellent, and introduces no audible distortion. Indeed I leave it on at all times. The audio quality on AM has also received good reports.
VFO stability is adequate, and quite in keeping with rigs of the time. If left for an hour or so on an SSB signal, it does require a small amount of retuning. This may put it at a disadvantage for digital modes or unattended voice operation via VHF/UHF remote-control links. The reviewer's unit has an analogue dial, which is large and easy to read.
I would rank receive performance as good to excellent. I prefer it to the FT-77S, though I haven't done head-to-head comparisons. The CW filter is worthwhile and works well. Front-end performance appears good, with no overloading oberved (maybe due to the front-end tuning).
The Reject control is the Rx notch filter. This reduces carriers by approximately 15 - 20dB. This is nowhere near as good as the automatic DSP notch filters on rigs like the FT-920 or the FT-847, but is still a worthwhile feature.
The noise blanker is effective on some types of impulse noise, but not others. It is certainly inferior to that of modern rigs (worth over ten times as much) such as the FT-920 and the FT-1000 MP.
What don't I like about the 301S? Not much. However, I would have preferred the headphone socket to be on the right of the front panel and be 6.5mm instead of 3.5mm. Also the Clarifier range is a bit much, and it's a bit finnicky. So is the Drive control, when trying to wind the power back.
For its time, I'd give it a 4.5 out of 5. When compared to modern sets, it's about a 3.5. If you see one for a fair price, buy it!
|
|
If you have any questions, problems, or suggestions about Reviews,
please email your Reviews Manager.
|
|
|
|
|
