eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | SWR & Wattmeters & Dummy Loads | Ten Tec T-Kit Model 1202 Dual Band Wattmeter Help


Reviews Summary for Ten Tec T-Kit Model 1202 Dual Band Wattmeter
Ten Tec T-Kit Model 1202 Dual Band Wattmeter Reviews: 7 Average rating: 4.4/5 MSRP: $50
Description: Fun to build wattmeter kit.
Product is in production.
More info: http://www.tentec.com
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Ten Tec T-Kit Model 1202 Dual Band Wattmeter.

OE3SGU Rating: 4/5 Feb 13, 2008 12:00 Send this review to a friend
good, but be careful  Time owned: 0 to 3 months
The kit is of very good quality, comes with clear instructions and the case is very sturdy. All parts are delivered. However, I experienced some problems in building the meter. The installement of the circuit board to the PL-sockets is very difficult. I wonder why Ten Tec choose this annoying method. Mine did not work on the first try, but thankfully a good friend checked it out and found the problem(s). I will use it as a spare meter in the shack. If you are looking for a nice project and very good QRP-meter I would recommend the OHR WM-2. Assembling it was easier in my opinion, but its only good up to 10 Watts. Would I build another 1202? I am not sure, perhaps.
 
K4SGT Rating: 4/5 Sep 24, 2005 20:40 Send this review to a friend
Fun and easy!  Time owned: 0 to 3 months
The price has gone up from $50 unfortunately. None the less, this was a very fun and rewarding kit to build. I found it pretty easy. This was my second kit. The meter could be more accurate if it were built by someone other than me, but with callibration it is not bad. So, for a bit of fun and some hands on learning, you can't beat it! If it were $50 again I would have given it a 5.
 
K9JRW Rating: 5/5 Sep 19, 2003 11:57 Send this review to a friend
Instructions cover all the bases  Time owned: 0 to 3 months
A+ to ten-tec for the quality of the information in the instructions. They leave no question unanswered in the assembly process. This in turn leads to less mistakes.
There was one 10 turn toroid to wind for the HF sensor portion. The unit can run off 9V battery or external DC power. All controls/switches are on the front of the box and are of good sturdy quality.
Took me about 4 hours to constuct over a 2 day period.
The calibration process requires known power source or a known meter to compare against with 4 small trimmer pots on the 4 distinct combinations of hi/lo power for both HF/VHF. Hopefully using the diode matching they document will tweak the performance to somewhere on the lower side of 10% accuracy.
Much fun!
 
VR2XMC Rating: 5/5 Jun 11, 2002 07:37 Send this review to a friend
Interesting and useful kit  Time owned: more than 12 months
It is an interesting experience in building your own SWR meter. The meter could be fairly accurate if you spend some time in matching diodes. It has two sensors so that you can use both HF and VHF rigs at the same time. The kit is not difficult to build at all but requires some patience.

I highly recommend to kit builders.

73

Johnny Siu VR2XMC
 
KF6IIU Rating: 5/5 Jan 24, 2002 21:42 Send this review to a friend
Fun Kit, OK Meter  Time owned: more than 12 months
This is a fun and easy kit to build. As a power / SWR meter, it's pretty basic, but I bump it up two stars since it's more fun to use something you assembled yourself, and having an HF and VHF meter in the same box is a unique feature.

You're going to be doing a lot of button pushing - there are three front panel switches for Power/SWR mode, 200/20 W range, and Fwd / reflected mode. Unit needs to be calibrated to a known power source. Operates off wall wart or internal battery.
 
KD6LM Rating: 4/5 Nov 30, 2001 14:52 Send this review to a friend
Very Nice  Time owned: 6 to 12 months
I found the kit easy and fun to build. I like the wattmeter/SWR bridge itself very much. What I particularly like aside from the dual band function (HF and VHF), for the 20 watt scale, 5 watts is the center (there are two scales, 20 and 200, each independent of the other). Having 5 watts as the center of the 20 watt scale makes it quite useful for QRP. For the serious QRPer or QRPp devote', one could set the 20 watt scale for 5 watts max, which would make the center point 1.25 watts, quite nice for low power work. Ten-tec claims a 10% accuracy at full scale for the meter, which is quite good as Bird's are typically 5% at full scale. As noted before, the case is quite good, and all of the components appear to be of top quality. So, why not a 5/5 rating? Cause you have to calibrate the wattmeter against a known source, i.e. another wattmeter, or a transmitter of known power output. This is a bit hassle, and requires one go to a hamfest or know a ham with some good equipment. Other than that, the kit is great and well worth the 50 bucks.
 
K9PL Rating: 4/5 Nov 30, 2001 13:52 Send this review to a friend
Attractive station accessory.  Time owned: more than 12 months
Fun to build kit with good quality components and a handsome, heavy-duty enclosure.

Offers: HF, 1.8 to 54 MHz and VHF, 140-150 MHz and Power Ranges of 0-200 and 0-20 watts RF
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.