eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Transmitters: Commercial/Military/Marine adaptable to ham use | Collins 718U-5M transceiver Help


Reviews Summary for Collins 718U-5M transceiver
Collins 718U-5M transceiver Reviews: 1 Average rating: 5.0/5 MSRP: $35k new
Description: Rockwell-Collins avionics transceiver, 2 to 30 MHz
Military designation: AN/ARC174(v)
Product is not in production.
More info: http://
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Collins 718U-5M transceiver.

AC5XP Rating: 5/5 Jan 28, 2002 22:45 Send this review to a friend
It doesn't get much better than this  Time owned: more than 12 months
As I am someone who likes "weird" HF radios, the Rockwell-Collins 718U-5M avionics HF radio sure fits that bill for me. This is a vintage avionics radio in all aspects, still in use in aircraft today. In military aircraft the designation for this radio is the AN/ARC174(v).
The military version is virtually identical to the commercial version except for two additional modes on the control module to add secure digital voice modes.
The 671U-4A receiver-exciter design used in this installation (the right larger box in the picture) stems from the early seventies and was used in many different HF radio configurations by Collins. The amplifier-tuner 548S-3 is of later design, as it was preceeded by an earlier tube version driven by the same receiver-exciter.
This older type power amplifier used the 4CX600 ceramic tube, good for 400 watts PEP.
The control unit 514A-7 allows the radio installation to be controlled remotely from the cockpit dashboard, through a serial data protocol. It is designed around an early Motorola microprocessor. An older version of this control box was the 514A-4, having a mechanical dial instead of the 7-segment plasma display that the 514A-7 control unit uses.
The mechanical dial drove BCD switches which were decoded by a TTL card and converted to the same serial protocol.
The 718U-5M radio has 10 digital memories which also store selected mode.
In "VFO" mode, toggle switches for each frequency digit allow rapid frequency change acros the band. The radio can be tuned anywhere between 2 MHz and 30 MHz in 100 Hz steps. It tunes the antenna automatically as soon as the microphone PTT is activated.
The 548S-3 amplifier (larger black-box on the left) is fully solid-state and has a built-in antenna tuner. This is not one of those limited range tuners, this thing tunes anything from coat-hangers to large dipoles and long wires. It does this by means of a motorized roller inductor and vacuum capacitor.
RF power is 100 watts PEP and average, specified on the antenna-tuner output terminals. This in practice means the solid-state amplifier is delivering 150 watts internally to the tuner, to make up for the tuner losses of about 2 dB.
The design is in concept very close to the Collins 651S receiver. The receiver-exciter is built as a card-cage concept similar to the 651S receiver, in fact it shares with this receiver the same three synthesizer cards, a conceptually identical RF module and uses the same I.F. chain concept, meaning it uses the same 500 kHz mechanical filters for USB, LSB and AM but in steel case though (the 651S uses plastic cased filters that can age due to moisture penetration)
The whole installation runs of a single-DC voltage anywhere between 22 and 32 volts, with 27.5V aircraft bus voltage as the nominal. Current consumption is about 16 amps at single-tone modulation.
Construction of this radio is superb. Only the best components are used throughout, and everything is coated with a moisture-protective varnish. The digital logic is built with early TTL components packaged in an early-style SMT case.
There are two versions of the 671U-4A receiver-exciter: the Collins round emblem version, and the later Rockwell-Collins version. The round emblem is actually a bit nicer from the inside, although slightly older in design. Rockwell later re-designed the circuitry for the digital cards to facilitate the newer available integrated circuits, as it became more and more difficult to find spare parts for the older version. But as said, the older round emblem version is somewhat nicer built.
The later version was manufactured up to the late eighties. That is almost 20 years of production for this radio!
Those of you that have read my somewhat critical review of the Rockwell-Collins KWM-380 now know why: I am kind of spoiled with the "real" Collins stuff. Compared to this radio the KWM-380 is a toy. Many of you might not realize it, but Rockwell-Collins has continued building the best in HF transceivers up to this very day; unfortunately not for the ham community any more...
The 718U-5M is fun to operate on the HF bands. The receiver works excellent and is very robust against overloading. Modulation sounds different from ham radios I have been told, quite penetrating but probably less pleasant to listen to.
It is hard to say what this kind of stuff would be worth, love is in the eye of the beholder. All I can say is that it probably does not make much sense to buy the individual modules at flea markets as it is difficult to find all the necessary individual components, let alone the information how to tie it all together. But if you are a serious collector and appreciate the best in Collins gear: go for it!
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.