eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Filters, Audio: (DSP and others) | Vectronics VEC-884 Help


Reviews Summary for Vectronics VEC-884
Vectronics VEC-884 Reviews: 2 Average rating: 4.5/5 MSRP: $249.95
Description: Vectronics tunable super DSP filter automatically eliminates hetero-dynes, reduces noise and interference simultaneously on SSB, AM, CW, packet, AMTOR, PACTOR, RTTY, SSTV, WeFAX, FAX, weak signal VHF, EME, satellite -- nearly any mode.
You get Vectronics tunable FIR linear phase filters that minimize ringing, prevent data errors and have "brick wall" filter response with up to 57 dB attenuation 75 Hz away.
Only Vectronics gives you 5 tunable DSP filters. You can tune each low-pass, highpass, notoch, and bandpass filter including optimized SSB and CW filters. You can vary the bandwidth to pinpoint and eliminate interference.
Only Vectronics gives you 5 factory pre-set filters and 10 programmable pre-set filters that you can customize. Remove QRM with the turn of a switch!
You get Vectronics automatic notch filter that searches for and eliminates multiple heterodynes.
You also get Vectronics advanced adaptive noise reduction. Silences background noise and QRN so much that SSB signals sound like local FM.
The automatic notch and adaptive noise reduction can be used with all relevant tunable pre-set filters.
Automatic gain control (AGC_ keeps audio level constant during signal fade.
15 pre-set filters -- factory set or program.
Select from 15 pre-set filters. SSB, AM, CW, packet, AMTOR, PACT-OR, RTTY, SSTV, WeFAX, FAX or any mode.
If you don't like our pre-set filters you can program your own -- a Vectronics exclusive! Save center frequency/bandwidth, low pass/ high pass cutoffs, auto/manual notch, noise reduction -- all filter settings -- in 10 programmable filters.
Vectronics gives both tunable filters to eliminate QRM and convenient pre-set filters customized for any mode.
A push-button bypasses your filter -- lets you hear the entire unfiltered signal.
2 1/2 Watt amplifier, volume control, input level control, speaker jack, PTT sense line, line level output.
Plugs between your transceiver or receiver and external speaker or headphones. Use 12 VDC or 110 VAC.
Product is in production.
More info: http://www.vectronics.com/vectronics/products.php?prodid=VEC-884
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Vectronics VEC-884.

NS5F Rating: 5/5 May 24, 2016 05:41 Send this review to a friend
Reliable and solid performer  Time owned: more than 12 months
I purchased my VEC-884 around 10 or 15 years ago with the express purpose of using it on various boat anchor tube receivers around the shack. It proved very reliable at filtering out QRN and occasional splatter. The big surprise was when I added it to the audio output path on my FLEX 5000. The FLEX is legendary with its ability to sift signals out of the hash, and with the addition of the 884 those abilities were enhanced even more. One plus with the 884 is the audio AGC which is good for reducing volume blasts during static conditions often found on 75m in the springtime. If you happen to come across one it's a handy addition to your shack no matter the vintage of equipment you may currently own. Also read the manual. It's the only way to get maximum benefit from the various functions available.. 73 NS5F
 
N0VA Rating: 4/5 Nov 26, 2004 15:40 Send this review to a friend
It's an MFJ 764B, really.  Time owned: 0 to 3 months
Since mine is at this point the first review of the VEC-884 I recommend also taking a look at reviews of the MFJ-784B. The case may say VEC-884 on the front control panel but open it up and you will see an MFJ-784B board. This means all the positive things written about the 784B also apply to the VEC-884. In my use of the VEC I have found no support for the negative comments written about it's twin brother MFJ-784B. Also, I picked this VEC DSP up used for $100 and that's a deal not to be missed.

One reviewer gave the 784B a 1/5 rating, writing that it was a very poor unit because it took more time to twiddle the knobs than he liked. Not so. There is a Quick Start section for CW and SSB that will get you going as soon as you make the cable connections. To get more sophisticated use from the 884 requires patience enough to read the detailed sections in the user manual.

I work only CW with a Ten Tec Paragon and probably don't need this external AF DSP because the Paragon has a full complement of filters down to 250Hz and effective passband and bandpass tuning. But the VEC is fun to play with, the audio filtering works and the Noise Reduction control absolutely does work in reducing atmospheric noise.

I actually have no negative comments to make about the VEC-884/MFJ-784B but I gave it a Good and not a Great! rating because nothing made by man is perfect. (opinion)
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.