- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

donate to eham
Reviews Categories | Antenna Rotators & Accessories | Alfa-SPID rotor Help

Reviews Summary for Alfa-SPID rotor
Alfa-SPID rotor Reviews: 46 Average rating: 4.4/5 MSRP: $1055
Description: ALFASPID rotors are of a high quality with Torque to spare. They are custom made to withstand the harsh Canadian conditions.

Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Alfa-SPID rotor.

<— Page 2 of 5 —>

K0TVD Rating: 5/5 Oct 8, 2012 05:59 Send this review to a friend
Super Strong!  Time owned: 6 to 12 months
After using the Alpha-Spid Big RAK for about 9 months, I have to say that it is the best rotator I have used in the 54 years that I have been a ham! Easy 4-wire hook up. I purchased mine from MFJ and they had it here within the week. Living on a farm in Iowa, we get high winds here and my old HyGain Tailtwister T2X would sometimes fail to move my large 20 meter array but that is a thing of the past. I think I could rotate my house with this rotator! Use with the Green Heron controller makes operating a breeze!
OZ1GCT Rating: 5/5 Jul 27, 2012 07:56 Send this review to a friend
I am very pleased  Time owned: 0 to 3 months
I have just mounted a Alfa-Spid RAU to turn my Cushcraft MA5B Mini-beam, after my Yaesu stopped working. I am very pleased with the Spid, and my neighbours love it, it's totally silent. My Yaesu 450 was very, very loud..
9A3VV Rating: 5/5 Jul 25, 2012 14:35 Send this review to a friend
Great one!  Time owned: 6 to 12 months
Alfa Spid RAU, the smallest of Alfa Spid rotors, in use since january 2012. Experienced several violent wind storms with no problems at all. Double worm gear holds it firm in position. Simple and rugged mechanics. No maintenance necessary. Using it with K4KIO's hex beam for 20 to 6 meters, atop of 2 in. OD mast. See Best buy, worth every cent!
K0UO Rating: 5/5 Feb 27, 2012 06:47 Send this review to a friend
Super strong has performed flawlessly  Time owned: more than 12 months
I have a RAK 1C, I have owned the rotor for about one year and haven't had any problems. My previous rotors were the M2 2800 and the largest prop pitch using the M2 control box which both had numerous control box problems, also the tailtwister, HRD 300 and many others and they all are DOA.
I'm very happy with this rotor and the controller it is built of steel not soft aluminium castings and it is very easy to understand with a the double worm gear drive making a simple and strong design. This unit has no breaks or pots to go bad, it does not generate any interference to my radios, and I see no quality control problems like some other reviews have stated. I really like the control box and mouse too it works with most PC program.
I purchased it from MFJ, they did not have a unit in stock and it did take about a month or two to receive the unit which did not make me unhappy with MFJ. The main unit is installed at 160 feet, turning a 36 foot log about 20 to 25 Sq ft of antenna. I'm located in the high plains of westeren Kansas where we have had numerous windstorms of over 60 mph with ice since the insatll. I started using 12 volts to turn it, but it took 2 min for a full revolution. I purchased a MFJ variable power supply which goes to 24 Volts now the rotor turns a full revolution in 1 min and only pulls a few amps, this makes a very nice setup at low cost. I would recommend this rotor and set up to anyone. My my tower is located over 300 foot from my ham shack and I just used 3/12 house wire the ground makes up 4 wires. I have never experienced promblems with the controllor or in directional calibration (read the book and it will work).
Also I like and the clever mounting system that easily allows it to be mounted anywhere in your antenna mast line, inside or outside of you tower and you can route the cables through it also.
Bottom line is that it is Super strong has performed flawlessly in very high wind, ice and snow with large antennas, see my QRZ page K0UO!

Steve K0UO V31KW
K1LU Rating: 5/5 Jan 26, 2012 13:57 Send this review to a friend
Very good Rotor & Service  Time owned: more than 12 months
Purchased the Alfa-Spid Big RAK about 2 years ago, at which time also purchased an R-21 control by GRE. Installation into top section of Tri-Ex LM470D was simpler & quiker than anticipated. It requires only a 4 wire cable. It easily handles a 22' steel mast with 1/4" wall + 4L SteppIR at 72' and a 2L M2 40M beam at 85'. Instruction manual is good but does not contain a schematic nor a picture of chassis containing electronics.

Live in valley that is prone to frequent lightening year round. Was hit recently and quickly determined, using a VOM and the trouble shooting suggestions in manual that the problem must be the "reed switch." Physically checked it out---reed was burned. Access to the electronics in the rotor couldn't have been easier. Remove 5 screws that don't come all the way out of the plastic cover, so little chance of losing any of them. The chassis pops out with a slick of the wrist with screw driver on edge of plastic chassis. On rear is reed, cut it out and solder in new one using a piece of scotch tape to hold the device in place. Be very careful with reeds---made of glass, very tiny and delicate. Don't put any pressure on it or leads; otherwise, you might break a couple as I did. Make sure wires inside the reed lay parallel to the chassis, not perpendicular. Takes 10 to 15 minutes to perform this repair.

This type of event has occurred with other rotors that I've owned, but this was the absolute easiest to repair---absolutely no need to take rotor down.

The shipping container that the rotor comes in is not really strong enough for the task. It will probably be crunched when received, but fortunately the rotor is wrapped in lots of bubble type material and thus no injuries to the it.

Found that calls and e-mails to Hy-Gain (Distributor) and Alfa-Spid, Ltd. gained immediate responses. Parts are available from Hy-Gain or Alfa-Spid, but if might be quicker to get electronics from a company like Mouser if you are somewhat impatient as the writer is. Also, I found that Green Heron Engineering is very quick to respond to calls and e-mails regarding their products. And the follow-up by these three companies was very good as well.
Jim K1LU
IK8TEO Rating: 5/5 May 13, 2011 09:06 Send this review to a friend
Spid RAU  Time owned: 0 to 3 months
Hello everyone,
I bought the Spid RAU, the smallest of the series, after carefully reading your comments on and now that it's mounted I can tell you my experience.
I needed a light and strong pole mount rotor, with no cage, and I was immediately struck by the RAU for its mechanical and electronic.
It mount bearing drive shafts used in off-road and has a mounting system with 4 pins passing, easier and more effective use of traditional brackets.
The rotor uses reed switches and not the classic pot that has no limits in the mechanical rotation and can be reset to zero degrees at any position you are. It has a resolution of 1 degree.
I use the Spid RAU to turn my 2 element yagi dynamic, supported by poles arise by force of arms. The system is simple, light and effective and it is visible on my page or or on my channel on Youtube.
The rotor, double worm, has absolutely no side play and is powered by a 4-conductor shielded 1.5 mm long by 25 meters.
Tested directly next to the radio station did not generate any interference, both in HF and VHF / UHF.
Excellent control box, small and full, with the functions you use in manual, preset and control computer. It has the round flat type CB microphone but there is also a preferable version with terminals.
Do not use the mouse options so it is very sensitive to RF.
I bought it directly from the factory by friendly and very helpful Mr. Bielecki.
After 20 years of amateur radio I can say that the Spid RAU is much higher than many other famous rotors.
Best 73 de Francesco IK8TEO
K6UM Rating: 4/5 Sep 22, 2010 14:21 Send this review to a friend
Good so far  Time owned: 0 to 3 months
After losing my 3rd HD73, it was time for a bigger rotator. I liked the worm gear drive so I chose the RAK. It has gone through two mild winds with no problems. I was unable to get the RS232 connection working in any emulation mode with any of my software. I discovered PstRotator, which controls the RAK in native mode. I can now control this rotator in WriteLog. The 4 rating is only due to not having a big wind storm to see how it handles that.
DK3NG Rating: 1/5 May 26, 2010 13:57 Send this review to a friend
Would not buy it again  Time owned: more than 12 months
I have an RAK and a RAS. Both suffer from the same problem in that they lose directional calibration at random (no, it's not mechanical slippage!). While I can live with this on my RAK which turns a three-element HF beam as it is relatively easy to reset the controller, it is INTOLERABLE on my RAS which is employed in a four-antenna 144 MHz EME array. If the system loses its settings at night time there is no possibility of recalibrating the controller (needs to be done on sun noise for best results). When directional calibration is lost, indication can be off by as much as 100 degrees. I have had two replacement controllers sent by the Polish manufacturer - all to no avail.

I was contacted by a chap claiming to be a director of the Canadian parent company offering to help resolve the problem. After answering his many questions relating to symptoms, measurements and so on and providing a raft of suggestions concerning possible improvements, I never heard from him again.

I was offered a complete refund by the German distributor but have not taken the company up on it (yet) because removing the rotator from the antenna is a project in itself.

I am now working on setting up a non-proprietary controller.

In my view, the company have some important quality problems to address.

Mechanically the rotators appear to be ok, although the mast clamping arrangements leave something to be desired, too.

As I said, never again!
KB2HUK Rating: 5/5 Apr 10, 2010 14:48 Send this review to a friend
Like a polish tank !  Time owned: more than 12 months
I have had a Alpha Spid rotor up for 10 years and it has weathered some very bad Buffalo New York storms . Never a problem easy to use and great customer service . Some calls were made to the company and the nice folks there always took the time to answer all my questions and make suggestions. I am very satisfied ! John
KC0BMF Rating: 5/5 Jan 5, 2010 18:22 Send this review to a friend
The RAS is GREAT  Time owned: 6 to 12 months
I've had my RAS az & ele rotor for a year now and really enjoy it.Haven't had any problems other than operator error. I have 2 of M2 biggest oscar antennas the 2MCP22 and the 436CP42 U/G and the RAS handles them very easily. I was sorry to see others had trouble, but if your antenna becomes misaligned do to strong winds its a pretty easy fix just point your antenna north and reset the controller. No need to pull the antenna. And as far as its weight, it is heavy, ITS MADE OF STEEL LIKE EVERYTHING USE TO BE THAT LASTED FOR EVER.. If I can find 1 more Cushcraft 13b2 (that will give me 4) I'm going to mount them up on the Spid and try a little QRP EME and am sure the Spid will handle them. I do have a little noise on VHF, but it looks like, by reading, that there are some pretty easy fixes. And its not enough that it bothers me. I'm putting up a 72' crankup and it will have a Spid on it also.
<— Page 2 of 5 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.