- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Tools & Test Equipment for the amateur radio work bench | Simpson 260 VOM Help

Reviews Summary for Simpson 260 VOM
Simpson 260 VOM Reviews: 27 Average rating: 4.7/5 MSRP: $200.00
Description: Simpson Electric Co. 260 Volt-Ohm-Milliammeter is a rugged,reliable,all-purpose measuring instrument.It is used for measuring A.C. and D.C. voltages,resistances,direct currents,decibles and output voltages.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Simpson 260 VOM.

<— Page 2 of 3 —>

ERIEDXER Rating: 5/5 Mar 26, 2010 10:31 Send this review to a friend
Excellent analog VOM  Time owned: more than 12 months
This is a well made piece of test gear, and will last forever if cared for. Probably one of the best analog VOM's ever made along side other Simpsons.
KB0XR Rating: 5/5 Apr 6, 2009 05:11 Send this review to a friend
A Man's Meter  Time owned: more than 12 months
I've had mine over 30 years now. Built like a tank and just "Looks" right. Yeah, I've got a few DVM's also but the 260 is the one I use the most for my modest measurement needs.
K4XZ Rating: 5/5 Apr 5, 2009 19:51 Send this review to a friend
Great classic  Time owned: more than 12 months
Every ham should own one of these.Rugged reliable and fairly accurate. One thing to check when buying a used 260 is the battery compartment. This meter works so good most people don't check until it does not work. Then the clean up starts. Buy one you won't regret it.

73 Joe K4XZ
K1YPB Rating: 5/5 Apr 5, 2009 18:10 Send this review to a friend
An Excellent Classic  Time owned: more than 12 months
I have had my "260" for well over 35 years now. What a great VOM. Durable, rugged and reliable. Every shack should have one! They don't make instruments like this any more.
W8AAZ Rating: 5/5 Apr 5, 2009 17:24 Send this review to a friend
Does VOM functions well  Time owned: more than 12 months
This is about the prime ultra VOM if you are looking for one. Lots and lots on ebay and often bring prices that show a demand despite DMM's being available for decades, and lots cheaper. I was totally satisfied with them as a VOM, but I have moved on to buying Simpson 303 meters, a VTVM that looks like a 260. If you buy a 303, get the probes, or at min. the probe connectors as they are not available commercially. Sort of mini Switchcrafts but obsolete. Remember these Simpsons are bakelite, a wonderful material that will shatter if dropped on a hard surface! I used 260's professionally till recently, sometimes. Have to keep low resistance on the D cell battery terminals for good low ohms zeroing. 260's can be calibrated with adjustments unlike cheap VOM's.
AF4O Rating: 5/5 Oct 25, 2008 09:01 Send this review to a friend
A Classic  Time owned: more than 12 months
Bought mine at an auction. Its an old one. I had to fix several things but it works great now. Built like a tank.

I honestly dont use it that much as i have become spoiled with my Fluke 77 but when you need to see a meter swing then it goes into service.

I remember in electronics school, we trained on one of these that had circuit breakers!

VE2ITZ Rating: 5/5 Sep 15, 2008 09:08 Send this review to a friend
"The Simpsons" Meter  Time owned: 0 to 3 months
Just got one in a Flea market going to Ottawa this weekend.

Have not used it much. But as a paper weight and to add to my collection of 40's Radio equipment, this is a keeper for my museum collection and home decoration.

Looks are great along with the 40's lamp radios and tube testers.

N1BEC Rating: 5/5 May 27, 2007 16:06 Send this review to a friend
A tool no one should be without!  Time owned: more than 12 months
I've used Simpson 260's of various models since college (that would be 1980).
Everything has its place, and the 260 with its analog movement runs rings around DVM's in places like tuning radios (where you want to see a needle swing) and checking diode and transistor junctions.
If it matters whether a battery voltage is 1.20 or 1.19 volts, or if I need to measure a high impedance circuit, then I'll use something else.
My personal favorite is the Series 6. I have one at work, another on my test bench at home, and like Shroeder of Peanuts fame, several more in storage (minus batteries!)just in case anything happens to the ones in daily use.
And I do use them daily!
The only criticism I have is that when you measure Ohms in the two lower scales, the connection between the "D" cell and the battery contacts tends to get dirty, so you may experience erratic readings and non-repeatable zeroing. A good contact and battery buffing takes care of this.
Also, remember to switch the meter out of Amps when you go to measure Volts!
They are cheap, work as specified, take incredible abuse, and keep on working. Get yours now, before I hoard them all!

73's, -Tom N1BEC/7
K0UC Rating: 5/5 Oct 1, 2006 19:34 Send this review to a friend
a classic  Time owned: more than 12 months
Very tough meter that holds calibration.
It's that simple. It does what it's intended for. No, it's not a high-impedance input meter, but it wasn't meant to be. The 260 is also quite RF-proof. Try using a cheap meter or many digital meters in a high RF environment...they make a fine field-strength meter.

But not the 260. Just reads what you want it to!
K1FPV Rating: 5/5 Sep 22, 2006 13:54 Send this review to a friend
Outstanding Work Horse !  Time owned: more than 12 months
Having owned and used one for nearly 40 years as an engineer, I find this instrument to be reliable, rugged, and dependable. Each time it goes in for calibration, it is usually right on or just slightly off. Not bad for a 40 year old workhorse!

I don't know where the previous reviewer is coming from, but if you need to read a voltage on a high impedance sourse, you use a DVM or VTVM, but you can use a scope too for that matter! No it won't be as accurate as a DVM, but it can be used! Would you say scopes are no good too? Why knock something down when it isn't being used for what it was intended?

The Simpson 260 is still #1 in my book when used for what it was intended!
<— Page 2 of 3 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.