- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: HF: Vertical, Wire, Loop | MFJ-1788 Super Hi-Q Loop Help

Reviews Summary for MFJ-1788 Super Hi-Q Loop
MFJ-1788 Super Hi-Q Loop Reviews: 37 Average rating: 4.3/5 MSRP: $429.95
Description: High Efficiency 7-21.5 MHz Continuous Coverage Magnetic Loop
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the MFJ-1788 Super Hi-Q Loop.

<— Page 2 of 4 —>

G6YEK Rating: 5/5 Jul 28, 2013 22:18 Send this review to a friend
GREAT  Time owned: 0 to 3 months
Owned now for only 3 days,FANTASTIC only 6 feet above the ground.
VE3MCA Rating: 5/5 Jan 15, 2013 11:39 Send this review to a friend
Great low profile antenna  Time owned: 0 to 3 months
This past weekend (Jan 12/13, 2013) I installed the MFJ-1788 outside in my yard about 7 feet above ground on a metal pole. The antenna is setup vertically with the loop ends in a NE/SW direction. The antenna is about 15 feet away from the main house and 8 feet from the carport (brick, vinyl siding with some metal trim). Coax cable run is about 50 feet of RG-213. During the installation, the only issue that came up was when I was attaching the brackets to the base of the antenna. The taps were slightly off and it took some time and patience to get the bracket to screw in flush and straight. Once that was done, the rest of the install and setup was a breeze. Ensure you read the instruction manual, especially when it comes time to tune the antenna. It takes some practice and patience to get the tuning down. First few attempts to tune, I was wondering why is it taking so long to tune and I would stop short of a proper tune thinking there was something wrong with the antenna or the location of the antenna. It is normal to wait 30 seconds or longer to see the SWR needle begin to drop (guess I was used to automatic tuners that only take a few seconds to tune). I have also posted a video on youtube on the tuning procedure to help others out. Once I got the antenna to tune, I was on the air making PSK31 DX contacts in no time. Some of the contact made within the first day..from my QTH in London, Ontario, Canada -- Czech Republic (OK1EP); Austria (OE9PCJ); Estonia (ES3RM); Sweden (SA7BWV); Dominican Republic (HI8CAR); Slovenia (S52UF) and many local North American contacts. Signal reports were mostly 599 to lowest 469. Running between 30 to 80 watts using Kenwood TS-480HX. Overall, I am pleased with the performance of the antenna. The workmanship on the head unit is fine, everything works and cabinet is square and set well. Again, the only issue was when attaching the brackets/screws to the pre-drilled holes which were slightly off making it a chore to set the bracket straight. Considering the size of the antenna, the performance is awesome and a relief for me as I am in an antenna restricted neighbourhood. I have tried the MFJ apartment antenna with the base coil and clips, and Buddipole antenna (vertical config.) with only satisfactory results. Sure, the price of the MFJ-1788 is on the high end, but that includes a tuner which provides easy calibration to an antenna that is a fraction of the size of many other HF antennas and it gets out with great signal reports.
WA6MJE Rating: 2/5 Jan 12, 2013 20:00 Send this review to a friend
Variable Capacitor Mis-Aligned  Time owned: 0 to 3 months
I just purchased the MFJ 1788. And of course I had to drill out the mounting holes like everyone else. After ten years of manufacturing this same product, MFJ has yet to address this minor but annoying issue.

Here is the real problem. The loop will tune 15 meters and the bands below until it gets to 40M. At that point it will tune down to about 7.125mhz as shown on my antenna analyzer, but no lower. I need to go all the way down to 7.0 mhz to work CW and JT65.

So then I moved the loop all over my yard, and put it higher, and lower to see if this problem was specific to my location, and nothing made it tune lower. Then I took off the lower covers, and played with the inner loop configuration from round to oval and back again as the manual suggests, which changed the SWR at 7.125 but did not allow it to tune lower than 7.125 mhz.

I then took off the upper covers, and noticed that the variable capacitor plates are not aligned properly. The variable plates are closer to one side of the fixed plates than the other. In other words, on a scale of 1 to 100 with 50 being the center line between the plates on the fixed bank, the variable bank is about at the 80 position, very close to one set of plates on the fixed side, and very far from the other set. It should be half way (50 on a scale of 100) or equidistant if it were within design specifications.

At the low end of the tuning range, the plates are fully meshed, but the misalignment would likely produce less capacitance than when properly aligned, and this likely explains why it will not tune below 7.125.

I see no way to adjust the alignment of the capacitor variable and fixed plates to that it will tune the bottom of the 40 meter band as advertised.

I was hoping that this would be the exception to the lack of MFJ quality control rule, but sadly here I am again in MFJ hell. It will be awhile until this is worked out with them.
KB8BO Rating: 5/5 Sep 7, 2012 11:54 Send this review to a friend
Exceeded Expectations  Time owned: 0 to 3 months
I received my MFJ 1788 two and half weeks ago. Everything worked fine out-of-the-box. I have been pleasantly surprised how well it works. I have had other mag loops made from 1/4" copper tubing that are far less efficient than the 1788. I have made a/b comparisons with my inverted L antenna. On 20 m and above, the 1788 is usually better than the inverted L. On 30 m, it is almost an S unit down from the inverted L. And on 40 m it is about an S unit and a half down from the inverted L. For its size, I am pleasantly surprised at its performance. By the way, I haven't yet put it outside. It is standing vertical in a spare bedroom on the second floor.

The only downside is that it is more noisy than the inverted L. This is consistent with the other mag loops that I have owned. The literature says that mag loops are quieter than most other antennas, but my experience has been just the opposite.

Overall, I would highly recommend the 1788 to anyone who has antenna restrictions. Be careful of where you place it, because metallic objects do have an effect and moving it or turning it can make a drastic difference in the SWR. Here again, this is consistent with other mag loops that I have owned.
STAYVERTICAL Rating: 5/5 Aug 7, 2012 03:07 Send this review to a friend
Antenna restricted no more  Time owned: 3 to 6 months
The lure of a small yet effective H.F. antenna is the holy grail of many hams.
The MFJ1788 I have is a nice piece of MFJ engineering, and works like advertised.

The ABS cover does not seem waterproof but I think it is thick enough to do its job of protecting the insides from most of the weather.
In fact I simply put a plastic cover over it, have not found it affects performance, and solves the weather problem.

When I first received the loop I had to do the usual final finishing which others have described.
Widening the holes on the mounting brackets to avoid putting in the bolts at an angle and cross threading the nuts inside.
I would suggest first putting in the bolts with the brackets gently by hand and if there is any binding - stop and widen the bracket holes.

The control box was in good condition except that the reflected power needle was off zero.
After opening the box and gaining access to the meter, a simple adjustment set this right.

Apart from those two things the unit was ready to go and has performed very well on 40m to 15m.
It is annoying to have to do some final finishing, but being used to building Heathkits and fixing old radio's it was not too onerous.

It is expensive, but it is not simply a loop but also a cross needle power/swr meter and controller.
Overall, not a bad package - and if you are a ham without space for a big beam or have HOA restrictions this little giant can save your H.F. operation.

Well done MFJ.
KF4FM Rating: 5/5 Jun 8, 2012 07:50 Send this review to a friend
Great antenna  Time owned: more than 12 months
My MFJ-1788 loop is a fantastic antenna and works flawlessly when properly tuned. Tuning can be a bit tricky at first, but becomes easy with use. I find that tuning to the strongest receive signal first, makes it quicker and easier to fine tune to the lowest SWR. That practice also eliminates fine tuning to a frequency you decide not to use because it's busy.

My 1788 is horizontal at 22 feet and I've worked South Africa from east central Florida with very good signal reports both ways. I was very careful to install it away from too much metal as instructed in the manual.
N3OV Rating: 3/5 May 15, 2012 11:25 Send this review to a friend
OK- But a chore to use.  Time owned: 0 to 3 months
OK- After waiting two months the 1788 finally arrived. Being antenna restricted I mounted it vertically seven feet off the ground. 65 ft of Davis BuryFlex good quality coax. Pain to tune. But you do get use to it after some trial and error. High SWR on 40m 2.5 to 3. Better SWR on 20M 1.5 to 2.0 I will attempt to remove the outer covering and adjust the internal tuning loop as stated in the manual. Worked Spain with 100 watts on SSB 20m....Fl, IL, GA, NC all signal reports. Works but a chore to use.
N1LS Rating: 2/5 Mar 28, 2012 13:25 Send this review to a friend
No MFJ support  Time owned: 0 to 3 months
As with other reviews mounting hardware must be modified to make it work. Remote Control box was received with Freq Controls pushbuttons all pushed in and nonfunctional. With HRO help got a replacement from MFJ. Sent back the broken one. Second unit meter light does not work. Fine Tune up/down led's don't work. "Beeper" does not work. You can at least tune the antenna now. Called MFJ and talked with two techs who said I should return it. Would send me return info. Two weeks later...still waiting. Did open unit and found two wires to meter lamp shorted together making lamp inoperable. It does tune but I stll lack all the functionality of the remote box. Poor workmanship- great idea!
VK2LC Rating: 4/5 Nov 20, 2011 21:26 Send this review to a friend
Good antenna when you fix it  Time owned: 0 to 3 months
Ok its MFJ, so that means it has been put together by a first year apprentice and needs finishing off. First of all the brackets dont fit so as in previous posts you need to file out the slots to make it line up with the threaded holes in the main support.

My controll box was bent and needed panel beating must have been that way when packed as no damage to control as it was wrapt in bubble wrap and boxed in tight.

Ok once you finish the quality control and ensure nothing else will fall off it works extremely well. It is about 1/2 to 1 "s" point down compared to an inverted V on 40 meters which is my band of choice and very quiet. Tuning is tricky the first couple of times but a snap once you get the hang of it.

The tuning changes with temperature so sometimes you need to tweak it mid qso.

In summary, quality control is zero, design is 5 out of 5 and ease of use is 4 out of 5. I'd buy another one, but would be nice not to have to fix it before use
KC2RMO Rating: 5/5 Nov 9, 2011 09:40 Send this review to a friend
I'm Amazed!  Time owned: 0 to 3 months
I've only been using it for a couple of weeks, but have been making contacts that far exceeded my expectations. It only takes a little time to get used to tuning it. Pricey? Yes! Does it work? YES!
<— Page 2 of 4 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.