- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: HF: Vertical, Wire, Loop | MFJ-1788 Super Hi-Q Loop Help

Reviews Summary for MFJ-1788 Super Hi-Q Loop
MFJ-1788 Super Hi-Q Loop Reviews: 34 Average rating: 4.3/5 MSRP: $429.95
Description: High Efficiency 7-21.5 MHz Continuous Coverage Magnetic Loop
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the MFJ-1788 Super Hi-Q Loop.

<— Page 2 of 4 —>

KB8BO Rating: 5/5 Sep 7, 2012 11:54 Send this review to a friend
Exceeded Expectations  Time owned: 0 to 3 months
I received my MFJ 1788 two and half weeks ago. Everything worked fine out-of-the-box. I have been pleasantly surprised how well it works. I have had other mag loops made from 1/4" copper tubing that are far less efficient than the 1788. I have made a/b comparisons with my inverted L antenna. On 20 m and above, the 1788 is usually better than the inverted L. On 30 m, it is almost an S unit down from the inverted L. And on 40 m it is about an S unit and a half down from the inverted L. For its size, I am pleasantly surprised at its performance. By the way, I haven't yet put it outside. It is standing vertical in a spare bedroom on the second floor.

The only downside is that it is more noisy than the inverted L. This is consistent with the other mag loops that I have owned. The literature says that mag loops are quieter than most other antennas, but my experience has been just the opposite.

Overall, I would highly recommend the 1788 to anyone who has antenna restrictions. Be careful of where you place it, because metallic objects do have an effect and moving it or turning it can make a drastic difference in the SWR. Here again, this is consistent with other mag loops that I have owned.
STAYVERTICAL Rating: 5/5 Aug 7, 2012 03:07 Send this review to a friend
Antenna restricted no more  Time owned: 3 to 6 months
The lure of a small yet effective H.F. antenna is the holy grail of many hams.
The MFJ1788 I have is a nice piece of MFJ engineering, and works like advertised.

The ABS cover does not seem waterproof but I think it is thick enough to do its job of protecting the insides from most of the weather.
In fact I simply put a plastic cover over it, have not found it affects performance, and solves the weather problem.

When I first received the loop I had to do the usual final finishing which others have described.
Widening the holes on the mounting brackets to avoid putting in the bolts at an angle and cross threading the nuts inside.
I would suggest first putting in the bolts with the brackets gently by hand and if there is any binding - stop and widen the bracket holes.

The control box was in good condition except that the reflected power needle was off zero.
After opening the box and gaining access to the meter, a simple adjustment set this right.

Apart from those two things the unit was ready to go and has performed very well on 40m to 15m.
It is annoying to have to do some final finishing, but being used to building Heathkits and fixing old radio's it was not too onerous.

It is expensive, but it is not simply a loop but also a cross needle power/swr meter and controller.
Overall, not a bad package - and if you are a ham without space for a big beam or have HOA restrictions this little giant can save your H.F. operation.

Well done MFJ.
KF4FM Rating: 5/5 Jun 8, 2012 07:50 Send this review to a friend
Great antenna  Time owned: more than 12 months
My MFJ-1788 loop is a fantastic antenna and works flawlessly when properly tuned. Tuning can be a bit tricky at first, but becomes easy with use. I find that tuning to the strongest receive signal first, makes it quicker and easier to fine tune to the lowest SWR. That practice also eliminates fine tuning to a frequency you decide not to use because it's busy.

My 1788 is horizontal at 22 feet and I've worked South Africa from east central Florida with very good signal reports both ways. I was very careful to install it away from too much metal as instructed in the manual.
N3OV Rating: 3/5 May 15, 2012 11:25 Send this review to a friend
OK- But a chore to use.  Time owned: 0 to 3 months
OK- After waiting two months the 1788 finally arrived. Being antenna restricted I mounted it vertically seven feet off the ground. 65 ft of Davis BuryFlex good quality coax. Pain to tune. But you do get use to it after some trial and error. High SWR on 40m 2.5 to 3. Better SWR on 20M 1.5 to 2.0 I will attempt to remove the outer covering and adjust the internal tuning loop as stated in the manual. Worked Spain with 100 watts on SSB 20m....Fl, IL, GA, NC all signal reports. Works but a chore to use.
N1LS Rating: 2/5 Mar 28, 2012 13:25 Send this review to a friend
No MFJ support  Time owned: 0 to 3 months
As with other reviews mounting hardware must be modified to make it work. Remote Control box was received with Freq Controls pushbuttons all pushed in and nonfunctional. With HRO help got a replacement from MFJ. Sent back the broken one. Second unit meter light does not work. Fine Tune up/down led's don't work. "Beeper" does not work. You can at least tune the antenna now. Called MFJ and talked with two techs who said I should return it. Would send me return info. Two weeks later...still waiting. Did open unit and found two wires to meter lamp shorted together making lamp inoperable. It does tune but I stll lack all the functionality of the remote box. Poor workmanship- great idea!
VK2LC Rating: 4/5 Nov 20, 2011 21:26 Send this review to a friend
Good antenna when you fix it  Time owned: 0 to 3 months
Ok its MFJ, so that means it has been put together by a first year apprentice and needs finishing off. First of all the brackets dont fit so as in previous posts you need to file out the slots to make it line up with the threaded holes in the main support.

My controll box was bent and needed panel beating must have been that way when packed as no damage to control as it was wrapt in bubble wrap and boxed in tight.

Ok once you finish the quality control and ensure nothing else will fall off it works extremely well. It is about 1/2 to 1 "s" point down compared to an inverted V on 40 meters which is my band of choice and very quiet. Tuning is tricky the first couple of times but a snap once you get the hang of it.

The tuning changes with temperature so sometimes you need to tweak it mid qso.

In summary, quality control is zero, design is 5 out of 5 and ease of use is 4 out of 5. I'd buy another one, but would be nice not to have to fix it before use
KC2RMO Rating: 5/5 Nov 9, 2011 09:40 Send this review to a friend
I'm Amazed!  Time owned: 0 to 3 months
I've only been using it for a couple of weeks, but have been making contacts that far exceeded my expectations. It only takes a little time to get used to tuning it. Pricey? Yes! Does it work? YES!
W4AFK Rating: 3/5 Oct 2, 2011 13:16 Send this review to a friend
How I fixed my MFJ-1788  Time owned: 0 to 3 months
OK... I repaired the antenna (see previous post) as follows:

1. Removed the bottom back cover from the antenna.

2. I cut the bolt with the captive heli-coil.
BTW, I know it's not a real "heli-coil", but you understand what I mean.

3. Bought replacement SS bolts @ Lowe's.

4. Bought matching SS Hex w/Nylon Insert, Lock Nuts.

5. Expanded the slots in the saddles so that the bolts can be straight. This was the most important step! If the bolts are not straight, it's very easy to cross-thread them and as press-fit nuts are not that solid, they pop out.

6. Mounted the antenna to the mast (1x uses the lock nut the others use the stock mounting holes/nuts) <-- It's truly amazing how >> easy << it is to install once the bolts are aligned properly!

7. Reassembled the back cover.

8. Installed the antenna on a ground mounted tripod.


a. Match your mounting holes to the COTS saddles you provide! On my antenna, it was >> impossible << to keep the bolts straight without expanding the slots in the saddles.

b. Add a paragraph in the assembly manual about proper alignment of the bolts. They should be easy to screw. If not, there is a problem. The results are the cross-threaded bolt and the "Imagineered" solution I had to come up with. It wasn't fun for a brand new antenna but hey, I did not want to go though the RMA & exchange process especially since it took almost 3 months to get mine.

BTW, I searched the web and noticed that I was not the only person who has experienced this problem. Could it be a tolerance issue?
N0AH Rating: 5/5 Sep 18, 2011 11:28 Send this review to a friend
Cool Beans! Thx ARRL School Grant!  Time owned: 0 to 3 months
Love this antenna. We went with the MFJ-1788 15M-40M model over the 10-30M model-

1. Working DL's on 17M from Denver with the antenna 4 feet off the ground in test mode was awesome- KH6 was also worked-

2. Now we have the antenna mounted for the Acres Green Elementary School (KD0NIV) Rabbit Ears Radio Club-

3.Tuning is a bit tricky, but using an antenna analyzer, we can find our exact resonant points quickly, then fine tune- Kids will learn a lot with this antenna-

4. It really does have a low profile, and out of the box, everything was there-

5.Mounted horizontally at 25 feet now with Diamond 2M/70cm antenna 2 feet above it. The loop antenna was slightly affected, raising it's resonant point 100KHz, but no problem in performance.

6. Excellent instructions- manual is very informative too of how this antenna works- very surprised by the details, fb!

7. Thx to the ARRL for the school equipment grant! And to MFJ for working directly with us, and HRO for their excellent service-

8. Antenna took only 4 weeks from order date to arrive-

We would take this antenna anywhere to work DX or a contest- It is just fun- Would make a great Field Day antenna too- but keep in mind that EVERYTHING near this antenna can mess with it- Would suggest an ideal installation is to mount it in the clear- even if 4 feet off the ground (-; Kids are loving it- lots of magic in this antenna......

N6TEA Rating: 5/5 Sep 9, 2011 09:35 Send this review to a friend
It's Magic! Superior Compromise Antenna  Time owned: 0 to 3 months
Living in an apartment on the first floor is not conducive to good HF propagation but for this amazing antenna. When I asked the management if I could put up an antenna, they asked, "is there anything that looks like a satellite dish?" This is it! MFJ makes these to order. Mine took several weeks as I ordered it just after the Dayton Hamfest. I bought it from HRO who ships them free. Janet at Anaheim HRO kept me up to date on the ETA. Herself a longtime ham, she really knows the business of our hobby. Curious as to the quality, I propped the loop up on a soft chair in the living room and carefully removed the 26 screws that hold the ABS covers on. Inside I was amazed at the quality and pride of construction demonstrated by the aluminum welds on the HUGE variable capacitor and the solid, bright solder points (see my review on the MFJ website if you wish). One screw with its nut to help hold the SO-239 needed to be tightened slightly. I suppose it came a bit loose in transit from MS to CA via rumbling truck. Packaging was quite adequate. I used a Rig Expert AA-54 antenna analyzer to check the tuning of the end stub. No adjustments were needed for any band. All tuned 1.5 or better without the auxillary capacitor powered up. With power, I have learned to tune it between 1:1 on all but 15 meters which will come in at 1:2 - 1:4. To tune it, you first set the desired frequency (make sure your radio's internal tuner is OFF). Then add about 30W of unmodulated power (either CW or AM). Watch the needles. When they drop and the course tuning lights go out, either the up or the down light will be lit. Then, use the fine tuning as indicated up/down. I've learned to slow down as the needle falls using fine tuning. By doing this, you eliminate the needle "bounch" downward and get much lower SWR. Then, you may turn on your rig's built in antenna tuner to drop it dead on 1:1. You can even use the rig's tuner to extend the MFJ's bandwidth from the selecdted frequency. My antenna is mounted vertically on an MFJ-1919 tripod, a very rugged accessory. I use a DX Engineering 1:1 current choke at the shack entrance and have NO RFI in the shack nor is there any interference with neighbor's devices. By all means, read the directions carefully. If you have questions, MFJ tech support is more than happy to help. Just call them. The wait in not long. Clearly, MFJ succeeded in delivering a unique solution for stealth antennas. It is both well made and engineered. Now, the reality is you will probably not get 5/9 signal reports but from So Cal, I have QSO's from Magadan, East Russia (4,325 mi.), Molokai, HI (2,425 mi.) on 20 meters, and the entire West Coast, plus the Southwest, and FL so far on 40 meters. Signal reports on the more distant QSO's were low, but I got the QSO. I even got a 5/9 from a Sacramento mobile station (435 mi.). So, read the directions, install it carefully, use a 1:1 current choke, learn to tune it and you will enjoy ham radio from an apartment or anywhere.
73 de Mike Slate
<— Page 2 of 4 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.