eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Antenna Rotators & Accessories | Yaesu 1000SDX Help


Reviews Summary for Yaesu 1000SDX
Yaesu 1000SDX Reviews: 28 Average rating: 3.4/5 MSRP: $(missing—add MSRP)
Description: 23.5 sq. ft. wind load rotator
Product is in production.
More info: http://www.yaesu.com/amateur/rotator.html
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Yaesu 1000SDX.

<— Page 3 of 3

AC7PN Rating: 1/5 Nov 7, 2002 22:20 Send this review to a friend
Early Death  Time owned: more than 12 months
I have an 8 element log periodic with a 30 foot boom that is free wheeling tonight on the top of my tower. The rotor was rated for 23 sqft of wind load, but my 15 sqft M2 antenna and a 35 knot wind has trashed a 15 month old rotor. No, I am not impressed. Well I did love the controller. I'm really not looking forward to going up there and replacing it. The next one will not be a Yaesu.
 
F6GNZ Rating: 3/5 Sep 20, 2002 04:33 Send this review to a friend
Turns in heavy wind  Time owned: more than 12 months
Used in-tower with a rubber shock absorber between mast and rotor (from a truck power transfer shaft) to turn 3 stacked 10/15/20 meter 5-el log-yagis: break could not stop the top bell portion turning in a heavy wind, had to repair three times distorted shaft that controls end-stop switches as bell turned beyond stop limits.
Replaced with 2800SDX that now turns 6-m boom 144, 2-el XM204 7-MHz widespaced beam, A3WS 3-el for 10-18-24 MHz and 5-el 14 MHz log-yagi on 10-meter heavy-duty boom without any problems !
 
K7BG Rating: 5/5 Aug 25, 2002 19:30 Send this review to a friend
Surprised me.  Time owned: more than 12 months
I had to give this a 5 because I did not think it would last as long as it did. I turned a 2 el 40m yagi and a 5 el 20m Hy-gain (a 402CD and 205BAS) at 90 feet for 6 years with this rotor. I just took it down because it was freewheeling and I could tell it was toast. I opened up the case and it was totaled. But, with the winds we get on the plains of Montana, I never thought it would last this long! I babied it and always turned at the slowest speed.
 
WL7M Rating: 5/5 Nov 5, 2001 16:19 Send this review to a friend
Great Value/Great Product  Time owned: more than 12 months
I've owned my Yaesu 1000SDX for over 2 years, and it has functioned without a problem in this arctic environment where it sees wind chills of -100 F and wind gusts of up to 125 mph (my weather recorder stops there!) I use the Hazer system on a 40 foot Rohn tower overlooking the Gulf of Alaska at 1200 feet....a great combination.

A great companion accessory is the IdiomPress RotorCard, which completely automates the system when used with DX4WIN or other software logging programs which provide this feature.

73,
Joe
WL7M
 
KB9VQC Rating: 4/5 Jul 2, 2001 20:26 Send this review to a friend
Looks Good  Time owned: 3 to 6 months
The rotor is very nice but you must use the tower absorber joint. The plate will take up for misalignment. I tried to save money and not use it but when I would turn the rotor I would hear it binding. It will also take up some of the load on the rotor. Unlike the Hy-Gain the 1000 has no play to take up for the misalignment. I have 2-18XXX and 432-9WL at 76 feet. So far, no problems. I have seen 65 mph wind, and it has been up for 5 months.
 
W3PP Rating: 5/5 Sep 2, 1999 09:08 Send this review to a friend
Love em  Time owned: unknown months
I use a number of these at my station. One of them has been turning my 5 el 20m Yagi (42' boom) for 2 1/2 years. This is mounted on a 70' Hazer Aluminum tower which flexes quite a bit, and probably takes a lot of the stress off the rotor. The only problem I have had was with one turning a 5 el 20m yagi (46' boom) which shattered the upper case and gear housing after about 3 months. I replaced it with a G2800 and found that the rotor plate was significantly out of level. I believe this is what stressed and caused the failure of the G1000SDX. I particulary like the display and 450 degree rotation capability. I recently changed all the
rotors to end stop on South so that I could rotate through north for JA/EUR openings. Much better! I got excellent service from Yaesu on replacement parts for the broken rotor, and it is now back in service.
 
W3AB Rating: 5/5 Sep 1, 1999 16:28 Send this review to a friend
I love the presets!  Time owned: unknown months
I've been twisting my KT-34XA with this rotor for 4+ years now. Only a squeak of a problem, a burned out lamp that wasn't too difficult to replace. I dealt with the sloping case by making an extender for the rear feet. I also bought the HD mast clamps so I wouldn't have any problem.
 
W4AN Rating: 5/5 Aug 30, 1999 21:26 Send this review to a friend
I Love the Control Box!  Time owned: unknown months
I'm turning a stack of 5 element 10's and another one turns a 5 element 15M on a 36' boom. Neither has failed in 3.5 years. The control box is great. The needle comes off so that you can position it where the antenna is pointing. It also has point and click positioning which is great during a contest. Two things I don't like... 1) The control box is not flat on top. That means no stacking. 2) The clamps that hold the mast are made of aluminum. I have heard of others snapping these plates. I have not had that problem.
 
<— Page 3 of 3


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.