eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Speak Out
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


QSL Managers
     

Ham Links
     


Reviews Categories | SWR & Wattmeters & Dummy Loads | Diamond SX-100 Pwr/SWR Meter Help


Reviews Summary for Diamond SX-100 Pwr/SWR Meter
Diamond SX-100 Pwr/SWR Meter Reviews: 6 Average rating: 4.0/5 MSRP: $144.95
Description: 1.6-60 MHz, 3KW/300/30 Watt settings.
More info: http://
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Diamond SX-100 Pwr/SWR Meter.

M3JPE Rating: 5/5 Jul 6, 2005 05:35 Send this review to a friend
Excellent  Time owned: 0 to 3 months
The Diamond SX-100 SWR & Power Meter is an excellent meter with all the functions needed for day to day use on a fixed station.

Not recommended for continuous swapping in and out of stations as the centre connectors are easily bent and there are limitations on ABSOLUTE accuracy, but 99.9% of the time this is not an issue.

Note: This meter measures from 3W (not 20W as stated in some places).
 
AI8H Rating: 3/5 Jul 2, 2005 16:53 Send this review to a friend
OK - But be Careful  Time owned: months
The sockets on the back are goofy: as another reviewer noted, they need attention if even rarely excercised. There is absolutely no tensioning surrounding the center pins of the connectors. Mine was remedied by placing a small, circular 'keeper' spring around each center pin supported by a crafted piece of Teflon over the center of each below the springs.

The PEP readings are off a good bit (approximately 25 percent on the low side) and not easily adjustable. The SWR adjustment is very limited in range - mine is close, but not 'spot on" and also low.

Get one for about $40 in used, working condition in good cosmetic shape and it is well worth it.

This is a "Secondary" meter at best, but useful.

 
NL7ZM Rating: 1/5 Jul 2, 2005 12:36 Send this review to a friend
Peak Reading  Time owned: 0 to 3 months
The front page of the instructions states.
The peak reading only indicates 70% to 90% of the actual peak value. I find this to be unacceptable.
I returned it for refund, the dealer did not question my reasons. This is something you don't find out until you buy. To the credit of the manufacture they admit the instrument is not accurate.
 
N4DEK Rating: 5/5 Dec 26, 2004 19:42 Send this review to a friend
Great Meter  Time owned: more than 12 months
Been using these meters for quite some time and they have always served me well. Very nice meter that works great.
 
ZL1UST Rating: 5/5 Oct 26, 2004 21:17 Send this review to a friend
Awesome  Time owned: more than 12 months
A local importer introduced me to this beauty 10 years ago and it is still going strong.Brilliant dial lamp illumination.This meter has surpassed anyother HF meter I have owned.Only one minor gripe is if the meter is not left connected in line permanently but used for testing different station setups the SO239 centre conductor socket has a tendancy to splay apart in time with the continual connect/disconnect.This requires periodical tweeking with the aid of a thin blade screwdriver so as to put it back into a shape that will contact the centre pin of the PL259 when it is reconnected.
 
WR2W Rating: 5/5 May 23, 2003 20:14 Send this review to a friend
Looks & Performs Great  Time owned: more than 12 months
This meter has a large lighted meter, has good front panel lay-out, looks great, and performs great. I compaired my SX-200 on the same radio with the same accuracy. Complements my station set-up very nicely....
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.