eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Ham Shack Accessories | OptoElectronics M1 Frequency Counter Help


Reviews Summary for OptoElectronics M1 Frequency Counter
OptoElectronics M1 Frequency Counter Reviews: 1 Average rating: 4.0/5 MSRP: $259
Description: Handheld digital frequency counter (50 Hz-2.8 GHz)
Product is in production.
More info: http://www.optoelectronics.com/m1.htm
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the OptoElectronics M1 Frequency Counter.

KE4MOB Rating: 4/5 Jul 24, 2003 16:08 Send this review to a friend
Great-- as long as you don't have to work on it.  Time owned: more than 12 months
I really wanted to give this a five, but I can't. The features are there, the accuracy is there, and it's convenient. I regularly use it for repeater maintenance work and "sniffing" in general. It's very reliable and I've never had any problems or concerns with the measurements it has given.

I've had this for a few years, and up until the NiCad batteries went south a couple of months ago, it would have gotten an easy five--I could have overlooked the loose coupling on the antenna.

What really, really, irks me is the batteries. To replace the batteries, one would assume you take off the back cover, right? Wrong. You take off the front cover (4 screws), then remove the screws on the circuit board (2 more screws) and then remove the screws on the top of the back cover (2 more screws), which allows you to pull the whole innards of the thing out of the way. Once that's done and the batteries are changed, it takes pretty much two people and a screwdriver to get the case halves to line up properly with the screw holes. (It's kind of like putting the case back on some of MFJ's stuff!!) In fact, sometimes the MODE button gets stuck down due to the case misalignment and has to be popped up with a paperclip or small knife.

Granted, these are just minor annoyances, but they are the tarnish which keeps this counter from really shining. I like the operation of the unit....and hate the case!!
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.