- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: HF: Verticals; Wire; Loop | Cushcraft R-5 Help

Reviews Summary for Cushcraft R-5
Cushcraft R-5 Reviews: 56 Average rating: 4.3/5 MSRP: $539.99
Description: HF Vertical
Product is not in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Cushcraft R-5.

Page 1 of 6 —>

AG5T Rating: 1/5 Feb 5, 2018 09:05 Send this review to a friend
Extremely disappointed  Time owned: more than 12 months
I received this antenna used thinking I was getting a good deal. This antenna is a total piece of junk. I cannot copy ANY DX signals at all. Sometimes I can hear the DX on one of my dipoles but there is absolutely NO COPY on this vertical. Even U.S. stations can't hear me very well on transmit. This is the worst experience I have ever had with an antenna. Again, total piece of junk. Never copy stations and nobody can hear me.
VA2DV Rating: 5/5 Jul 1, 2015 19:02 Send this review to a friend
Easy solution for 5 bands  Time owned: 3 to 6 months
I had many Cushcraft verticals in the past (MA5V, R-7000) and this one is my favorite. It handle a KW easily and it is light enough to be installed by the operator. The MA5V was nice but somehow limited in bandwidth and efficiency on 20m.The R-5 is more "hot" and broadbanded. I had an hard time finding one of these antennas in good shape. The production as ceased almost 20 years ago ! The basic material is of good quality so maintenance is easy. I only replaced the matching network enclosure since the original one was deteriorated by UV's. I really like the slick look of it and the omnidirectional coverage. For casual operating, it's perfect. No need for a rotor or tuner for extra bandwidth. Just wish that I am going to be able to maintain it fo a long time.
VR2AX Rating: 5/5 Jan 14, 2015 21:47 Send this review to a friend
Worked Very Well   Time owned: more than 12 months
I also had a R5 back in 1990/1991 in Hong Kong, under my previous call VS6UK. Mounted on the roof of a 'low rise' apartment block in Central Mid Levels, base around 90 feet above ground. Take off was not ideal, with Hong Kong Peak rising nearby to the south, and high rise blocks to the north. But it did well enough and I had no problems working all over the world using a barefoot Icom 765 on all the HF bands. All in all very satisfying as an antenna, and it was something to behold visually when viewed from the street.

The only sad thing was that while taking it back to UK a year or so later some of the small mechanical bits ment missing. Still have most of the important bits sitting in my garage in GW, just waiting for me to get the time to get it going again there, more than two sunspot cycles later.
KK5DR Rating: 5/5 Jan 14, 2015 17:00 Send this review to a friend
Great vert, not lightening proof.  Time owned: more than 12 months
I had an R-5 on top of my tower several years back. It was 65 feet to the bottom of the mast mount, the top was over 80 foot off the ground. I used it only on the WARC bands as I had a KLM 4 element tri-bander just under it. It performed outstandingly, nearly as good as the beam, but no need to turn it. I'd still have it up today had not been a direct lightening strike blew it to bits. Clearly not lightening resistant! Hi hi
BTW, the tri-bander was untouched, zero damaged. All coax, all rotor cables, all other electrical devices on the tower were smoked. All gear in the shack was smoked, except those that were not connected to the station ground.
WA3HLP Rating: 5/5 Jan 14, 2015 15:51 Send this review to a friend
Did exactly what I needed  Time owned: more than 12 months
During Operation Desert Shield I had a 4 ele 20 mtr beam at 100 feet, an 11 element 13-30 log periodic at 40 feet and a Cushcraft R5 at 60 feet. With a remote antenna switch I was able to instantaneously switch between any antenna. I was running over 1200 phone patches at the time for deployed US Navy in the Persian Gulf, the Med, and the Red Sea. There was many a time when the band was about to close that the Cushcraft R5 kept me going for another 15-30 minutes after signals were almost lost on the other two antennas. Bottom line, get them up high and they work!
W9MT Rating: 5/5 Aug 19, 2013 22:39 Send this review to a friend
Up and running for 21 years...  Time owned: more than 12 months
Bought the R5 from Erickson Communications in Chicago, IL. in 1992, at about the same time I purchased my Kenwood TS-140. Both Erickson and the Kenwood are long gone, but the R5 soldiers on.

It wasn't without some problems over the years.

The first base section was of an older design that didn't have the vertical radiator firmly secured with screws all the way thru the fiberglas insulating base. The bottom section of the 18 foot radiator and traps was simply epoxied into the fiberglas. (Not good.)

The antenna's whipping around in the wind wore out the vertical radiator's epoxy actually making it loose and shifting within the fiberglas base tube. I shimmed the gap with slivers of G-10 pc board material in 1994 and put the R5 back in service, while in parallel buying a new base section from Cushcraft for $50.

Two years later (1996) the radiator's L-Bracket to the Black Box sheared from the side loading my shimming had created during more high winds.

Repair job #2 installed the new-style base, which had stainless steel screws all the way thru the fiberglass, well securing it to the radiator base.

This fixed the antenna for 16 years, until fall 2012, when the VSWR on all bands went very high. The best VSWR was on 10m (3.5:1). I felt I had a bad 10m trap and so did Cushcraft/MFJ, but traps for the R5 are no longer available. So, I left the antenna alone until Summer 2013. Then I took it down once again for the 3rd time in 21 years, and diagnosed my problem in 20 seconds...

The braid between the Black Box and the counterpoise radial ring had worn down and sheared from more than 2 decades in the wind and UV from the sun. I replaced it with 2 parallel braids of slightly differing lengths, made of RG-8X shield, figuring the redundancy would bolster the MTBF.

The antenna went back up and operated like new, hopefully ready for another 2 decades of trouble free service.

The R5 works great on all 5 bands from 20m up thru 10m, including 17 and 12m WARC. It's no rotatable tri-band beam, but will work all the DX you can reasonably hear.

I am pleased with the service from it that I have already enjoyed and will continue to enjoy going forward.

BTW, I snapped one of the aluminum mast clamping loops when putting the R5 back up. I was able to drill thru my antenna mast's wall (visible thru the hole already in the base for the tightening screw of the clamping loop) and replace the broken ring with a self threading lag bolt into the antenna mast.

Cushcraft/MFJ says the R-6000's mast loops are common with that of their R-6000 antenna and can be had for $5.94 each...still available. I may be purchasing two of them for a "future maintenance event". (A replacement and a spare for the one I didn't break.)
VA3PWC Rating: 5/5 Apr 1, 2012 21:56 Send this review to a friend
Excelente 1\2 wave antenna  Time owned: 0 to 3 months
I am glad to say about this vertical antenna. First of all I would like to tell you about my experience with other verticals. I had a Hy-Gain DX-88 and Cushcraft MA6V, I was very disappointed with both of them. After couple months thinking about what kind of antenna I should install at my girlfriendīs home, I have decided to go with R5 for a test. In 2 weeks I have worked with 100 Watts more than 120 DXCC entites. Report signals were very good, and some of them asked me about what kind of antenna I was using due to a good signal. Usually I work CW and SSB, and the best band in my opinion are 10 and 12 meters, with a very good results.. 20 meteres was little noisy, but I use IPO of the radio to reduce the QRN. Some DX stations worked: J52HF, V44KAI, 5N7M, 5T0JL,PZ5RA, ZB2FK, E51M, DU1HBC, 6V7Z, ZL1BYZ, ZL6PW, P49V, KH6MB, VK4HFO and lots of JA, Europeans and North America stations without any problem. I just bought a Collins 30L1 linear amplifier just in case, but it was not necessary to use in case I need to break a pile-up. Very... Very... Extremelly HAPPY with this antenna. Planning to get a R8 now to be installed at my cottage in front of the beach. 73 from Rick PY2EL \ VA3PWC
KC7MF Rating: 5/5 Sep 25, 2011 10:25 Send this review to a friend
Reliable Pile-up Buster  Time owned: more than 12 months
I acquired this used for $100.00 about two and a half years ago. It is up 8 feet on a pole stuck into Arizona dry ground and among a bunch of misquite trees. I have worked all over the world on this antenna. With the 300+ watt Swan 700cx it is great fun to bust pile-ups on the first call. I use a tuner to tweak the antenna but it easily tunes flat on all five bands. It would be fine without the tuner. It can be noisy but not annoyingly so.

It has survived some pretty nasty wind storms and the desert heat. Handles 500 watts no problem and is rated for 1500 I believe.

I recommend this antenna where space is a premium or stealth an issue. It is great fun for DX.
VE3PMA Rating: 5/5 Aug 21, 2011 11:40 Send this review to a friend
Excellent antenna  Time owned: more than 12 months
I'm on my second R5 (the first was hit by lightning and the matching network was fried). It's mounted atop a 40 foot tv tower and has withstood some very strong winds. In the 20+ years that I've had the R5s I've worked every corner of the world with them and broken many pile-ups with only 100 watts. Most of the time it will outperform my G5RV, but some days in some directions the dipole performs a bit better. Overall, an excellent antenna made with top quality components (both of mine were made in New Hampshire).
K3LU Rating: 5/5 Nov 22, 2009 03:53 Send this review to a friend
Over 10 years and going strong  Time owned: more than 12 months
I recently took down my R5 after being in use for over 10 years. The UV on the matching unit had deteriorated the black box a bit and the fiberglass on the vertical had begun to deteriorate as well but a few maintenance tips found on the net and some elbow grease, I think the R5 will be in service for many years more.
Page 1 of 6 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.