- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antenna parts, accessories, incl. baluns, hardware, etc. | CWS Bytemark HBHT200 Help

Reviews Summary for CWS Bytemark HBHT200
CWS Bytemark HBHT200 Reviews: 1 Average rating: 4.0/5 MSRP: $(missing—add MSRP)
Description: 4:1 "Tuner Balun"
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the CWS Bytemark HBHT200.

KY6R Rating: 4/5 Aug 17, 2003 08:56 Send this review to a friend
So far so good  Time owned: 0 to 3 months
I have been able to avoid the use of baluns with my 44 and 88 foot ladder line fed doublets, but since I switched to the new LDG AT-1000 autotuner, I have found that I had to add a balun (where I normally would have used a 1:1 current choke - right where the ladder line meets the coax).

I have been running 500 watts into one of these in a number of pileups (trying to get TZ6RD for hours), and I have not noticed any heating or saturation. It seems to work well with the AT-1000.

I will mount this better than where it is now (lying on the ground), and I will put it on a post with a plastic shroud to keep it from getting wet.

I will update this review after the winter rains!

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.