- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Power Supplies | Pyramid PS-14KX Help

Reviews Summary for Pyramid PS-14KX
Pyramid PS-14KX Reviews: 17 Average rating: 4.2/5 MSRP: $39.99
Description: 13.8 Volt DC 12 Amps continuous, 14 Amps peak.
Product is in production.
More info: http://
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Pyramid PS-14KX.

Page 1 of 2 —>

WB3KTW Rating: 2/5 Sep 7, 2012 09:17 Send this review to a friend
Flakey ??, but economical  Time owned: 6 to 12 months
Bought one to power an RF Concepts RFC-2-23 VHF amplifier (6 to 8 amp load). Seems to work OK for that purpose just fine. Then I WANTED to use it to power up individual work lights for my tractor (about 4 amps each) to determine the total load and the minute I hook up the 14 amp surge/12 amp continuous power supply, it signals overload condition, beeps, protection LED lights up, ...
Does not seem to like 55W Halogen H3 bulbs at all!
It probably senses what 'appears' to be a short way too quickly and triggers protection. In my humble opinion, a design flaw.
VE7KNQ Rating: 5/5 Jul 30, 2012 19:17 Send this review to a friend
Dependable  Time owned: more than 12 months
I have owned this power supply for well over 12 years and it has never once failed me in that time. I use it for powering my vhf/uhf radios and other low power equipment. Definately recommend this power supply.
N3OQD Rating: 3/5 Feb 16, 2012 20:57 Send this review to a friend
General overview  Time owned: 0 to 3 months
Another ham gave me this DOA. Blown fuse. It had one diode shorted and one pass transistor leaky. So I decided to replace the diodes and transistors as a set rather than just the bad individuals, Works now but not too thrilled with the heatsink being rather small for the task. at 13.7v I loaded it for 20 minutes with a 5.11 ohm power resistor. With my IR sensor, it showed about 60c between the transistors. Without a mounted fan, it is definitively not a continuous duty 12 amp supply. Cute though.
KI4FIA Rating: 0/5 Mar 14, 2010 17:28 Send this review to a friend
Would Not Buy Again.  Time owned: 6 to 12 months
I've now had 2 Pyramid power supplies (this model and another).

I had this model powering a couple scanners, after current drain about 4 amps. Power supply lasted about a year then start blowing fuses. As soon as you put in a new fuse and turn it on, it fries the fuse with nothing connected to the output. Both supplies did the same thing.

Will not buy any Pyramid products again.
KJ4HGN Rating: 5/5 Nov 27, 2009 21:34 Send this review to a friend
Great Power Supply  Time owned: 6 to 12 months
I've had this for 10 months and have never had any issues with my PS-14KX. This is great for any size shack and for any mobile out there that's uses under 65 watts. I have also powered my HT from this! Very, very pleased with my purchase.
KC9FSH Rating: 5/5 Feb 8, 2009 15:16 Send this review to a friend
Great power supply!  Time owned: more than 12 months
This was the first power supply I bought after I became licensed. It worked great to power my 2m/440 rigs at 50watts, which pulled roughly 10 amps . I never had this power supply kick out or go into protection until I failed to check out how much current my new IC-706mkiig would pull, so really it was my fault for trying to make it work outside of it's specs.

I upgraded power supplies so I would have one to power my HF rigs. My father still uses this power supply, for non-radio related things, and has had no issues at all.

If you are new to the hobby, or just short on cash get this power supply. You won't be disappointed, just make sure that you get a power supply that can provideo the amperage your radio needs.
KJ4AQV Rating: 5/5 Oct 11, 2008 18:09 Send this review to a friend
a work horse of a power supply  Time owned: 6 to 12 months
This is the best supply for a new ham to get? It have held up for me great. It will take it.
K5ETH Rating: 5/5 Apr 28, 2008 10:53 Send this review to a friend
True bargain  Time owned: more than 12 months
As an OT, I'm partial to linear power supplies and this one is a fine example of a well-built one. I've run 3 Motorola Radius transceivers all at once (only xmit on one at a time) with one of these power supplies for over two years and never had a hiccup from it!
WA8MEA Rating: 5/5 Aug 13, 2007 16:42 Send this review to a friend
Great supply!  Time owned: more than 12 months
This model power supply powered a 2 meter SSB 100 watt amp for MANY years. Nice, quiet, efficient. Ran cool. I accidently shorted the positive and negative a couple of times. Only damage: blown fuses.

(Speaking of fuses: I saw that someone had a "cow" over his Pyramind "dead out of the box". They do ship them with the fuses and fuse cover in separate baggie. Probably the reason why his PS was "dead out of the box. Hi.)
KI4MYD Rating: 5/5 Jul 24, 2006 16:43 Send this review to a friend
Nice Buy  Time owned: 3 to 6 months
I've owned mine for a little over 3 months or so now, and must say it performs very well. I use it consistently for talking with 25-50 watts with my 2M FM rig which pulls 5 amps on 25w, and 10 amps on 50w and the power supply has never went into protection mode.

I also use this one to power my HF rig, running 65w SSB and still have yet to have any problem out of the power supply. Yeah, the heat sink gets hot on the back, but it has never overheated or let me down.

Great unit for the price.
Page 1 of 2 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.