- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antenna Switching, Phasing, Controllers | Array Solutions Band Decoder/Relay Driver for Ten Tec Orion Help

Reviews Summary for Array Solutions Band Decoder/Relay Driver for Ten Tec Orion
Array Solutions Band Decoder/Relay Driver for Ten Tec Orion Reviews: 3 Average rating: 5.0/5 MSRP: $$134.00
Description: The Array Solutions Band Decoder and Relay Driver with Orion band data cable for the Ten Tec Orion radio works with remote coax switch boxes for automatic antenna selection.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Array Solutions Band Decoder/Relay Driver for Ten Tec Orion.

K8IA Rating: 5/5 Nov 11, 2007 07:35 Send this review to a friend
Perfecto!  Time owned: 0 to 3 months
Works slick. Easy to wire peripherals and no problems whatsover. I use mine strictly in automatic mode, driven directly from Band outputs in my Orion II. From unpacking to fully switching my Dunestar 600 Bandpass filter assemblies, total time about 15 minutes.

If you have an Orion or Orion II, you need this.
K2TA Rating: 5/5 Jun 10, 2004 00:59 Send this review to a friend
Great switch  Time owned: 0 to 3 months
It is recommended by Array Solutions that you provide a separate 12-16VDC supply to power the remote antenna relays. I used an old 12VDC wall wart from a wireless telephone. You'll need to supply the rotor control cable and I recommend using 10 conductor cable instead of the usual 8 between the control head and the relay driver box. The extra 2 wires are used to switch the system between AUTO and MANUAL modes and makes for a cleaner installation. The pre-wired Orion cable is professionally done. The painted steel case and PC boards are well made. Once the system is wired and installed it works flawlessly. If you are going to mount this remotely be sure to test wire it on the ground and cycle through the bands in auto and manual mode as you watch the relays close to be sure everything is connected properly.

This is a fantastic system! As the previous reviewer points out some other systems use the band switch information from the amplifier requiring that it be powered up. I can switch between the amp and the barefoot Orion and the Array Solutions system doesn't care. It is so cool to press a button to move to 20 meters and have the green light tell me my Cushcraft A3S is now on the line automatically. Excellent product. Excellent e-mail support. Note: The relay driver board contains 12 relays...enough for 2 control heads and 2 remote antenna relays of 6 positions each. Or you can use the extra 6 relays for other purposes. I highly recommend this system.
N5HTY Rating: 5/5 Oct 7, 2003 22:43 Send this review to a friend
Makes antenna switching automatic. Works Great!  Time owned: 0 to 3 months
The Array Soultions Band Decoder and Relay Driver for the Ten Tec Orion radio with the Orion band data cable makes switching bands automatic. You don't have to reach over and manually change the antenna. Works great! Wonderful product.
Some companies that make auto tune amplifiers also sell remote coax switch boxes or a controller for a remote switch box that selects the proper antenna when the amplifiers changes bands. In other words the antenna selector follows the amplifier. With that kind of setup you must have your amplifier on and in operate position.
With the Array Soultions product your antenna selection follows the radio. Your amp can be off or in standby. Much more convenient.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.