- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Transceivers: VHF/UHF+ Amateur Base/Mobile (non hand-held) | Icom IC-47A/H Help

Reviews Summary for Icom IC-47A/H
Icom IC-47A/H Reviews: 2 Average rating: 5.0/5 MSRP: $(missing—add MSRP)
Description: Icom 440 mobile from mid 80s
Product is not in production.
More info: http://
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Icom IC-47A/H.

KA2AYR Rating: 5/5 Apr 24, 2013 11:13 Send this review to a friend
Wish they were still current  Time owned: more than 12 months
This is a fantastic radio that has served me for over two decades. Wish I could still get single-band radios like this. As they age, you should know that the potentiometers begin to make intermittent contact and there may be a voltage regulator problem. If you are handy, have the manual, and can get parts, these radios are otherwise fantastic.
RADIOWEENIE Rating: 5/5 Apr 6, 2007 07:03 Send this review to a friend
Basic but still very good  Time owned: more than 12 months
I have had 2 ICOM IC-47As. I got them primarily because i was getting tired of all the inane jibber-jabber on 2m. Like all the other ICOMs i have had, these were durable, dependable, reliable, and high performing radios. Their transmitted and received audios were both excellent. Had not my ex-girlfriend sold them out from under me (along with several other radios), i would still be using them. It should be noted that the vintage of the IC-47A is such that no PL tones are in the radio. But for a base radio, this should not pose a problem. After market PL tone generators are available. In my own case, i sent the radios to an ICOM repair specialist in Torrance, CA. While there the tech suggested fixing the PL module so that PL was always on. Then the ground for Pin #2 was connected to the on/off switch. That way i could switch from PL 103.5 to PL 110.9 by grounding and ungrounding Pin #2. Result: I could go from Louisiana to Texas while using the same radio and just switching the tones from Louisiana's PL 103.5 to Texas' PL 110.9!

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.