eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Antenna Switching, Phasing, Controllers | MFJ 1701 Six Position HF Coax Switch Help


Reviews Summary for MFJ 1701 Six Position HF Coax Switch
MFJ 1701 Six Position HF Coax Switch Reviews: 14 Average rating: 3.5/5 MSRP: $50
Description: Six position antenna switch. Select 1 of 6 antennas. 1.8 - 30 MHz. Unused terminals are grounded. SO-239 connectors. 2kW PEP, 1 kW CW. 50 - 75 Ohm loads. Covered by MFJ one year limited warranty. MFJ will repair or replace (at our option) your MFJ product for one complete year.
Product is in production.
More info: http://www.mfjenterprises.com/products.php?prodid=MFJ-1701
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the MFJ 1701 Six Position HF Coax Switch.

<— Page 2 of 2

W2WO Rating: 5/5 Sep 14, 2006 09:56 Send this review to a friend
No problems  Time owned: more than 12 months
I have used one for about 10 years. No problems with it.
 
W5RHR Rating: 2/5 Jul 21, 2005 17:11 Send this review to a friend
good construction BUT  Time owned: 0 to 3 months
purchased this switch to replace a 20 year old B&W model 593 3 position switch i rescued from my junk box. Upon installing the MFJ i saw my VSWR reading jump way up from the B&W. I took the case apart and found a capacitor across the input SO-239 which must have added capacitive reactance to my feedline. I removed the offending component from the circuit and the SWr readings returned to acceptable.. I bypassed all switches and obtained the same vswr so the cap was the problem, otherwise nice construction for $45...
 
LNXAUTHOR Rating: 2/5 Feb 2, 2005 12:48 Send this review to a friend
not a good choice  Time owned: 3 to 6 months
- did an A/B/C comparison of this MFJ product (which has six positions); the Alpha Delta Delta-4 (with four positions), and the Diamond CX-310 (with three positions)...

- the Delta-4 and CX-310 effectively isolated incoming signals...

- NOT SO with the MJF 1701!

- so be warned: although the MFJ 1701 may work fine for your application, I believe most hams would hear the difference and would want the more effective switches by spending the extra $20...

- btw, the Diamond is extremely well-made... cast, formed, painted, w/quality components - up to commercial quality, not the sheet metal-stamped travesty of the 1701... (if incoming signals aren't isloated, what do you think will happen if you transmit at higher than QRP levels through the switch?)

- YMMV, of course...
 
K7VO Rating: 5/5 Jul 19, 2004 16:37 Send this review to a friend
Looks good, works well, decently made  Time owned: 3 to 6 months
I pretty much have to agree with everything the previous reviewer wrote. I bought mine at a hamfest because it was reasonable and have used it to switch between different HF rigs. It looks good, appears to be quite well made, and it has been problem free. It is a bit lightweight in feel. Still, with six positions you don't have a lot of choices at a decent price. Dollar for dollar you can't beat an MFJ-1701.
 
<— Page 2 of 2


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.