eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Microphone Equalizers & Transmit Audio Accessories | MFJ-1262 Mic Control Center Help


Reviews Summary for MFJ-1262 Mic Control Center
MFJ-1262 Mic Control Center Reviews: 7 Average rating: 2.1/5 MSRP: $79.95
Description: The MFJ-1262 microphone Control Center lets you switch between any two microphones by pushing a button. You can switch between a boom mi/headphone and a desk or hand mic, between a hi-fi ragchewing mic and a hard hitting DX mic or between a hand mic or desk mic.
Product is in production.
More info: http://www.mfjenterprises.com
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the MFJ-1262 Mic Control Center.

K6RIM Rating: 2/5 Jul 2, 2009 13:43 Send this review to a friend
Misrepresentation  Time owned: more than 12 months
Normally, I avoid MFJ products due to quality control issues well-known to the amateur community.

A number of years ago, I made an exception and purchased the 1262, to be used for switching between a Heil Pro headset and a Heil Goldline boom mic.

The 1262 works fine, BUT, as another reviewer observed in his e-ham review, the MFJ manual states that the 1262 has a stereo headphone jack BUT, it is, in fact, a MONO jack!

Buyer beware!
 
K1LLR Rating: 0/5 Mar 21, 2007 12:22 Send this review to a friend
not good at all-sorry  Time owned: 3 to 6 months
had high hopes for a mic controler.i read the directions several times..hooked up all the cords ..flicked the swith......nothing..opened it up(took off the cover),,and what did i find inside..nothing..empty box..i didnt realize mfj now owns ameritron ..i just bought an amp..thats goin to the junk pile as well -811 amplifier..also i bought a morse code tuteror..another one...Mighty Fine JUnk.do yourself a favor and stay away from all their products..H.R.O. refunded my money,but i will never ever buy anything made or owned by mfj..just last week i was at H.R.O. when someone brouht in a brand new ameritron amp whitch had missing parts and wires that were never secured or attached to anything..how can a company expect to do business when they have absolutly NO Quality control????i rate this company at minus10..Paul Kenyon..(K1LLR)
 
AF4KK Rating: 4/5 Mar 16, 2006 19:01 Send this review to a friend
Works very well!  Time owned: more than 12 months
I own both an MFJ-1262 and a 1260 mic switcher. I use the 1262 to toggle two mics between a Kenwood TS-480SAT and an Akinco DX-70T. The other is hooked up to my Icom IC-7000 and two mics. They work GREAT! No quality-control problems, no shorts, no stray RF! Just a very convenient vway to switch between the stock microphones and the Heil Goldines I use! Thank you, MFJ!
 
AD5TH Rating: 2/5 Dec 25, 2005 20:18 Send this review to a friend
OK - Once I repaired it  Time owned: 0 to 3 months
Poor QC as usual with MFJ. PTT line shorted to case by cover screw. This unit is not RF proofed and does not even have a ground lug to tie it in to my station ground. The ground plane of the PC board and case are common but both are floating.
I added a ground lug to the case and discovered
that pin 5 (PTT) was shorted to the case and now also to my station ground so that when I plugged this unit in my rig went to xmit. I traced it down to the left side cover screw being too long and actuall digging into the bottom surface of the pc board. It had always been this way but until I grounded the case no isssue. I added a spacer to the cover screw and all is well now. Also the manual states it has a stereo headphone jack but it is mono. Otherwise (hahaha!) it is an OK product. I also added 2 leds near the mic inputs so i couyld easily tell which mic was selected. My Icom provides +8vdc at 30mA at the mic so it was easy to wire in with no external supply needed. This 1262 replaces my MFJ-1260 which was actaully missing parts, jumpers, and what not..it is now a "parts unit".
 
NM1R Rating: 5/5 Oct 21, 2004 20:06 Send this review to a friend
Works great!  Time owned: 0 to 3 months
I purchased the MFJ-1262 mic switch recently and it works great. I am running an Icom IC-746PRO. I do not use the stock mic but am using a Heil Goldline Pro and a Heil Proset Plus. I have heard that you cannot mix mics with different wiring configurations, but both microphones are using the cables wired for the 746PRO. Using the headset I have to utilize a stereo to mono adapter or audio will only come from one of the two ear pieces. Not a big deal considering that the 746PRO isn't stereo. For my setup it's just what the doctor ordered.
 
GI0HWO Rating: 0/5 Jul 29, 2004 18:13 Send this review to a friend
Oh Dear  Time owned: 3 to 6 months
Don't buy one.
Build quality is poor.
RF proofing seems to be non-existant.
I got so fed up with mine I binned it.
I should have known better. Know what I mean.
 
WA0TTN Rating: 2/5 Feb 9, 2004 20:58 Send this review to a friend
Not what I expected  Time owned: 3 to 6 months
I have a very nice Kenwood MC-60 that I wanted to use with my Yeasu FT-847. I had built an adapter cable myself, but when I saw the MFJ-1262 I thought that was exactly what I was looking for. I ordered one and had to wait several months because MFJ was out of stock.

It finally arrived and I was immediately disspointed with the fact that, although it has two mic input jacks, the configuration jumpers only configure for one type of microphone at a time. I was envisioning being able to switch back and forth between the Kenwood and the Yeasu mics. So although I can plug in two mics, they'd have to both be Kenwood mics.

I went ahead and used it for a while, since it does have some nice features such as a headphone volume control. But I soon found that it was very prone to RFI. There's no ground stud on the box, so I would have had to modify it to tie it into my station ground. Even at that, I don't know if that would have fixed the problem.

So, with these problems, the thing went into the spare parts box. It is a nice little case, and I may gut it out, and rebuild it to my own liking someday. One last thing. When my MFJ-1262 it came with the latest catalog. Lo and behold, they have a new model, the MFJ-1263, that sounds like it does allow configuring two different brand microphones. It would have been nice if the MFJ salesperson had known about this model and told me about it.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.