eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Ham Repeater Controllers | ICS Basic Repeater Controller Help


Reviews Summary for ICS Basic Repeater Controller
ICS Basic Repeater Controller Reviews: 7 Average rating: 4.1/5 MSRP: $83.95
Description: Values entered in Volts, Seconds, WPM (Even Fractional)
COS & CTCSS inputs for repeater RX (can be ANDed)
Control Receiver COS and audio inputs
38 Commands available (Four new ones! V1.09)
Separate control receiver inputs - Has Priority
5 LEDs to indicate controller status
Product is in production.
More info: http://www.ics-ctrl.com/
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the ICS Basic Repeater Controller.

KC5TDG Rating: 4/5 Mar 6, 2010 19:42 Send this review to a friend
Great product  Time owned: 6 to 12 months
I gave this a 4 because I had to call tech support to find out if I had to install a diode or not, because the parts list did not show it, but the schematic did. Brian was very helpful and answered my question right away. This controller works perfect, I did everything it was suppose to. The beacon mode is a nice feature to have! I upgraded to the RC210 for the bells and whistles. The manual is kinda hard to understand on some subjects, but it will get you there!
 
K4RCC Rating: 4/5 Nov 25, 2009 17:50 Send this review to a friend
Good, stable basic controller..  Time owned: more than 12 months
Works as advertised. Good value for the money. My only 'gripe' is the audio.. Mine seems to 'amplify' white noise.. I don't understand it, and it's difficult to explain, but there is some sort of artifact on noisy signals. Almost like the thing boosts the noise.. Sounds great on quiet signals though.. YMMV though.. 73's
 
W9NUP Rating: 4/5 Oct 8, 2009 13:37 Send this review to a friend
Nice Basic Controller  Time owned: 0 to 3 months
I purchased the kit. Assembly time was a couple of hours.

Setting up the DTMF input, I found an oscillation on the U3 op-amp chip which restricted the window for the DTMF lvl. A .1 ufd across the U3 power pins eliminated the problem.

I give it a "4" rating as I agree with previous statements about the manual. Also the pc board needs to be revised as some parts are no longer used creating a void on the board.

All in all a nice little controller that works as advertised.
 
VE2JKA Rating: 4/5 Oct 4, 2008 11:29 Send this review to a friend
Gained a point!  Time owned: 3 to 6 months
After careful consideration and extended tests, this controller is a good value vs cost. ICS (Brian) Have very good service & support.

I am still a little dissatisfied with the manual, however that's only my personal opinion.

 
VE2JKA Rating: 3/5 Aug 10, 2008 01:46 Send this review to a friend
nothing special  Time owned: 0 to 3 months
Yet another controller that requires more than one visit to the site :( ... Quite buggy, don't like the audios produced..

Big 0/5 for the manual.

Quite disappointed will not buy another.


 
K6KDK Rating: 5/5 Nov 28, 2004 13:52 Send this review to a friend
Strong Features, Low Price  Time owned: 0 to 3 months
If your idea of a repeater is a solid reliable "form follows function" machine, and not a "Chatty-Kathy Doll" with so may useless bells and whistles that no one could possible understand or use, then the ICS Basic Controller may be what you are looking for.

The ICS Basic Controller represents a tremendous bargin in a simple uitility controller. It is a well made high quality board. The software is well de-debugged and follows a simple easily learned logic pattern. All this, and the price of admission is very low.

A feature of both the ICS Basic Controller and their Linker IIa Board is the implimentation of a true Control Rreciever input that takes "prority" over the Repeater if the system control operator sends DTMF tones to this "control only input port". This is a feature lacking even in some very expensive controllers, and, besides complying to the letter of the FCC law, it gives the repeater owner a nice warm fuzzy sense of security that this controller will be almost impossible to jam or high-jack by an intruder.

The company answered a few support emails from me within 24hrs and showed good responsiveness to my questions. Also they shipped the unit off my Pay Pal internet order in just a few days. I reccommend that if you are shopping for a controller that you download the User Manual from their web site and give it a read to see if the Basic might fit the bill. Speaking of the User Manual, this is probably the only negitive in the whole mix. The manual is in need of a good proof reading, if not a complete re-write. There are some horrible gramatical constructions that would probably have given my high school english teacher a heart attack, and there are some out right errors that a proof reading would have caught. (examples: Function Code 53, which is the Clear All DTMF Command Lines" function is mistakenly described as "To allow the user to keep the IDer from operating". Also there are sentence constructions like " The control a control reciever gives you is necessary for automatic control."

But the bottom line is that the unit is top quality and I would highly reccomend it.

-Dan K6KDK
 
W5GNB Rating: 5/5 Apr 17, 2004 00:04 Send this review to a friend
Nice and simple..  Time owned: 3 to 6 months
This controller is very easy to connect, setup, and use. The tech support from the company is superb. I have had mine operating for about three months now and it has been flawless.
Great product and highly recommended!!
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.