eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Reviews Categories | Antennas: VHF/UHF+ Omnidirectional: verticals, mobile, etc | Cushcraft ARX220B Help


Reviews Summary for Cushcraft ARX220B
Cushcraft ARX220B Reviews: 3 Average rating: 4.7/5 MSRP: $63.95
Description: Ringo Ranger II 222-225 Mhz
Product is in production.
More info: http://www.cushcraft.com/amateur/details.asp?catid=76
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help

You can write your own review of the Cushcraft ARX220B.

KI6OSH Rating: 5/5 Mar 8, 2011 21:13 Send this review to a friend
No complaints  Time owned: more than 12 months
Had this antenna up at 32 feet for about a year and a half and it works wonderful. I'm able to hit Mt. Diablo, about 90 miles away. through some surrounding trees no problem. Seems to be weathering the elements quite well, too. No complaints so far.
 
N4DBM Rating: 4/5 Jan 31, 2010 09:39 Send this review to a friend
Fine  Time owned: more than 12 months
As with the 2M version, the 220-B is the same as the old "Ringo Ranger" but with an added ground plane kit 5/8 wave below the feed point to clean up the pattern by keeping the feed line from radiating. These antennas are all OK, they're just stacked 5/8 waves and have a little bit of gain over a dipole. The 220 model I give it a 4 instead of a 3, like I did the 2M model, because the radials are a shorter and have less tendancy to break off than the 2M model. The radials are made from pot metal and are brittle and cheap. I finally wound up getting some stanless thread, and used 3/8 aluminum tubing for the radals and they have lasted for years. Be sure to SEAL THE CONNECTORS!! Water tends to run down the threads on the top of the PL connector where the tuning rod connects.. Put a blob of hot glue on it. Then coat the PL connectors with vaseline and put the boot over it and you'll probably be OK.
 
W2MSK Rating: 5/5 May 14, 2006 11:08 Send this review to a friend
Workhorse!  Time owned: more than 12 months
Cushcraft is an underated company. All of their products I've owned have worked very well. Sure, they might not be the most mechanically elegant but once constructed they work as advertised. This antenna has performed very well indeed, it has been in service for several years on top of a 45' tower and continues to exhibit a 1:1 SWR and radiate as spec'd. Solid, reliable and affordable.
 


If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.