- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Amplifiers: RF Power - HF & HF+6M | ACOM 1010 Help

Reviews Summary for ACOM 1010
ACOM 1010 Reviews: 66 Average rating: 4.9/5 MSRP: $2340 USD
Description: KW 160 - 10 m PA, 700 W PEP

Jan 2007 Note - Vine Antennas, UK agents for ACOM, have advised that their ACOM 1010 amplifiers now have a fan- noise reduction modification that reduces fan noise considerably whilst maintaing sufficient cooling of the amplifier tube

Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the ACOM 1010.

Page 1 of 7 —>

ON5HB Rating: 5/5 Dec 16, 2017 04:17 Send this review to a friend
Solid performer  Time owned: 0 to 3 months
I drive this amp with a TS-590S and it easily outputs 800W.
Nothing bad to say about this amp apart that it takes long to warm up.
I would buy another Acom any day.
AD0GW Rating: 5/5 Dec 8, 2017 10:00 Send this review to a friend
Wonderful amp  Time owned: 0 to 3 months
After using for one week I can say that it meets all of my expectations. Tuning is way easy.

I originally wired it for 120V, but after a couple of days I switched it back to 230V. Switching operating voltage requires soldering jumpers. There are many options for voltage settings, which could lead to confusion, but the documentation was sufficient to figure it out.
G7JZD Rating: 5/5 Jun 23, 2017 09:28 Send this review to a friend
Great Amplifier  Time owned: 0 to 3 months
Just had the Acom 1010 Amplifier for three days now. Simple to set up, and simple to use.Most of the recommended settings are very close, just made a crib sheet of the exact settings so i can go back to them quickly.
Will write another review in a few weeks, but a very happy Man with this purchase.
KB6HRT Rating: 5/5 Apr 27, 2017 21:31 Send this review to a friend
SWEET!  Time owned: 0 to 3 months
Only been using it since tuesday, been many years since I used a tube amp, guess i didn't forget as much as I thought I did. 750w most bands, It will do more but want it to last, am using it on 160m and 75m most of the time the guys I talk to on
160m say its not as load as the ALS 1300 700 vers 1200 watts, but it 2 S units up on my Kenwood TS990 at full output, so its doing what it should be doing. I run it through a tuner, the ACOM is seeing a 1 to 1 match, the amp is very quite an heat that comes out of it is just slightly worm, going to give it a 5 right off the batt. The extra tuning is not a big deal when using a Palstar Auto- tuner, this AMP is backup for me till I get the ALS1300 back from the factory...................73s.............kb6hrt
M0HDX Rating: 5/5 Mar 18, 2017 07:49 Send this review to a friend
Reliable  Time owned: more than 12 months
Acom 1010 is a superb medium powered amplifier that will easily produce 700 watts.The build quality is excellent along with the finish so looks great on any shack bench and the single russian ceramic GU-74B tetrode is cheap to replace should you ever need to,I did the fan mod jumpering-out resistor R35A for slightly more fan noise and much better cooling which i prefer.Tuning is so easy and takes seconds with my pre set cheat sheet.I paid £1200 for the Acom 1010 new and now they sell for £1695 just over a year later (Brexit bandwagon or pure greed not sure which) so a huge price increase. Still a lovely designed amplifier that works very well and like all the other Acom products very reliable.I use it Daily with no faults or issues.
DB3GF Rating: 5/5 Jan 17, 2017 00:27 Send this review to a friend
and DURABLE  Time owned: more than 12 months
...see my first reviews from 2009 and 2011; this black box drives my antenna now for more than seven yrs in SSB, CW and PSK31 w/out any trouble and it's first tube - and I'm still happy w/ this EXCELLENT DX tool. 750 Watts are the legal limit at Germany, so it's fine over here. Overall rating: OUTSTANDING
LA9JFA Rating: 5/5 Nov 3, 2016 01:46 Send this review to a friend
Great AMP  Time owned: more than 12 months
Got my ACOM 1010 two years ago and used it a lot.
Itís a great amp easy, safe and fast to operate.
With 50 Ė 60 watt input it works smooth and calm with 500 - 600 watt output.
I used the amp with 80 meter loop antenna, CushCraft R6000 and 9,92 meter homebrewed vertical and it works fabulous with all of them. Enough to get through pilups.

Here you are protected at all mats. Almost impossible to make mistakes and it goes into distress immediately if you make mistakes.
If you drive 100 watts input you may of course break the tube. Some hams have done that Ė thoughtless.
Recommendation; Read the manual.
MI0NWA Rating: 5/5 Sep 19, 2016 18:24 Send this review to a friend
Great amp!  Time owned: 3 to 6 months
Hey all! Hereís my take on this fine amplifier. I've been using this amp for around 6 months now and it's great. 40w from the rig will let me work 400w all day long. I found the LED's were a bit lazy on my model though. I tested this by putting it into overload to get the G1 G2 warning lights to come on and while the amp was only showing 600w via the LED's my power meter was showing 850w out so I knew then the LED's weren't to be trusted. Not a big deal though as itís always good practice to have a meter inline anyway to tune for maximum power.
The added feature on the amp is being able to handle 240w reflected power or as Acom state, about 3.1 SWR, so there is no need for a tuner unless you work with antennas with high SWRís but in my opinion there isnít any point using an inefficient antenna in the first place and an amp should be the last thing you should be using until you get your antenna sorted, or at least use one that's a bit flatter in the SWR department. This will save you having to listen to neighbours complaining when youíre slapping their electronics with loads of Anyway, I use this with an OptiBeam OB9-5 and a 40m Double Bazooka. My SWR on the OptiBeam is between 1.0 and 1.4 on all bands I work and 1.4 and 1.5 with the Bazooka. The rig sees no SWR at all as the amp holds it back, so really an excellent feature.
Lastly the protection, any misuse at all, say trying to tune on 40m when the switch is still on 20m it will detect it and switch into standby for a few seconds giving you time to realise the fault. It will also protect itself if you exceed the 240w reflected power.

Another couple of points. The heating up time is a bit long but I guess its necessary or Acom would have made it faster but I turn it on first and once I'm ready to get settled to work some stations its ready for operation. The second point is when you switch the amp on and it has finish heating up it will automatically switch to operate mode meaning the amp is active, its just worth knowing in case you are transmitting barefoot while youíre waiting on the amp heating up as when it finishes it will automatically push out on high power in operate mode, although it should still protect itself if there's a fault but I donít think it would be good for the amp having to put it through unwanted and unnecessary procedures.

Well, that's all I can say, highly recommend it. It's a great wee workhorse and looks awesome :-)

AK6ZZ Rating: 5/5 Sep 6, 2016 18:30 Send this review to a friend
Excellent amplifier  Time owned: 0 to 3 months
I just purchased an used Acom 1010 amplifier and all I can say is Wow! The one I bought was just serviced by Array Solutions as it was a Dxpedition amp that needed some repairs. The amp is great and put out a solid 800W with less than rated input.

The Acom 1010 is a great amp that is very easy to tune and it provides nice protection system. I highly recommend this amplifier. I thought I would miss QSK capabilities from other amps I have owned but I find the relays to be quiet and fine in non QSK CW. Overall a great amp especially at the amazing used price I paid.
MI0MSB Rating: 4/5 Jun 26, 2016 14:33 Send this review to a friend
Cost  Time owned: months
Nice amp 700 watts out and the only disappointment is that it has went from £1200 to £1600 in Less than a year from mid 2015 to now mid 2016 WHAT A RIP OFF the cost of parts or shipping has not increased 30%
Page 1 of 7 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.