- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Ham Software - Other than logging | Bonito Software Help

Reviews Summary for Bonito Software
Bonito Software Reviews: 20 Average rating: 1.7/5 MSRP: $$120-250
Description: Multi-mode Ham software
Product is in production.
More info: http://www.
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Bonito Software.

<— Page 2 of 2

FM5GB Rating: 0/5 Nov 6, 2010 16:46 Send this review to a friend
Trashware but expensive.  Time owned: 6 to 12 months
Could'nt use it !

After several e-mail with Bonito it became obvious that this piece of soft is'nt worth a euro or dollar.

I've never seen a computer hang that ugly with any existing software...

I won't sell the package; not being a crook.

Hands off!
W8JN Rating: 0/5 Aug 5, 2009 12:13 Send this review to a friend
it just gets worse  Time owned: 3 to 6 months
below is my original evaluation. i decided to give the boys at bonito another chance. everyone deserves a reprieve. i took out the old trusty bonito cd and had it go to the website and download the updates. it worked!!! WOW we are up and running. played with it for a while and then called it quits for a day. came back the next day and good ole' bonito went south. refused to boot up. hope the guys from bonito didn't give up their day jobs. they certainly aren't software designers
"my previous review of zero was incorrect. i apologize. just when you think this program cant get any worse... whammmmoooo.. i had it up and running for about a week, then kablowie!!!! it now comes on, locks itself up and then locks up the computer. this is without a doubt the worst program i have ever encountered in all my years of using a computer(more than 30). it only responds to control, alt, delete! wow...... the three a's describe this pile of horse manure. awful, atrocious and abysmal. if i could give it a negative 5 that would be to kind! icom tossed it in free with the purchase of my pcr2500. FREE was way overcharged!!!"
W4IJY Rating: 1/5 Jul 14, 2009 05:32 Send this review to a friend
Installation issues  Time owned: 0 to 3 months
Bought the software at Dayton 09. Have spent many hours to install withot any degree of success. The installation booklet is useless as a tit on a boar hog. Bonito's website lacks the ability to download the manuals which may/may not help one to work through the issues. After a number ofemails I refused their offer to download software to let them access my computer. A professional software engineer gave up on it too. Frankly, I do not think the software is for the average ham or faint of heart to stay away.
ALZABA Rating: 4/5 Jun 4, 2009 17:52 Send this review to a friend
Best PC App there is - needs a non-casual owner  Time owned: 0 to 3 months
I've used RC6 for a month or so now and here are my observations. It is by far the most complete, best "looking" app there is in its category. I, a Mac "expert" but a PC novice needed help getting it going which was promptly and happily provided by both the US folks and by Germany. It is not for the casual PC'er but if it is stuck to, it is by FAR the best app out there of its kind. (i've fooled with them all.) I run MY Icom R75 and PCR2500 with it and it looks like "mission control"! Not for wimps but very good.
N8DV Rating: 0/5 May 18, 2009 12:20 Send this review to a friend
Burned again!  Time owned: 0 to 3 months
Well back from the 2009 Hamvention with a new copy of RadioCom 6.0 After talking with Dennis Walter one of the authors regarding my problems with 5.2, he assured me that 6.0 has fixed all the problems. He gave me the update price on the software. Well it hasn't! I can't get it to run on my XP Pro laptop. Mr.Walter wanted me to download a remote desktop program so he could view my computer and fix the program. I emailed him back and said no way was he going to remotely view my computer. When I try to run the program, it won't even recognize the my Yaseu FT950 using the cables he provided. This is crapware. I am going to send it back and get my money. I am really surprised that the Hamvention committee still allows these crapware salesmen to attend the hamfest. Once again, I will email the Hamvention committee with my complaint regarding Bonito. Finally, download and support Ham Radio Deluxe, what software should be!
PREZ Rating: 5/5 Feb 1, 2009 15:51 Send this review to a friend
Fantastic Software  Time owned: 3 to 6 months
I'm just a SWL but ...

My QTH is rural MD: 1-1/2 hours from Washington, DC.

I'm using RadioCom 6.0.

It works just great.

Man oh man, the interface on this 'ware is just too sexy for words. It's like having an extra radio in the shack.

I decode RTTY, Fax, Synops, and CW with ease. I can pick out individual HAMS in a pileup because I can use my mouse to draw an audio DSP filter to peak their tone.

The same "roll your own" audio filters applies to cutting away the noise to get at a Fax or RTTY or a LW beacon. Very nice.

Having several audio scopes for the input and output makes plain SWL a breeze. It's easy to see where slice away the QRN to get at an african or a latin.

On SSB I get good Air Traffic Control copy from San Francisco, Cairo, Khartoum, Nairobi and Brisbane, Australia. Again it's the audio DSP.

The audio DSP compares pretty good with the active dsp I sometimes use, which is a CLRdsp box into a Gap HEAR IT module into a Kenwood SP-31 filtered speaker.

My setup is fairly modest.
PC: a single core 3.7 GHz AMD 'chine (with a serial port). I have 1 Gig of RAM, and use an integrated soundcard.

Radio: an out of the box ICOM R-75 grounded to concrete entombed rebar.

Antenna: I flip-flop between my passive 4-foot vertical (from RF SYSTEMS) mounted 40-feet above ground on the roof. And a 40-foot wire (at 38-feet) in the attic that terminates into a Winradio Long Wire Adapter that presents a 50 ohm load to the R75.

Even under noisy conditions I get pretty good copy of RTTY, SYNOP, and CW.

I've copied CW Nav beacons all the way down to 198 kHz.

And the Faxes are clear and sharp. And easy too, because of an auto-detect feature.

I recommend getting a PC with a serial port, and porting the radio's audio to the microphone-in jack of the PC. Keep the radio's volume at low to medium to minimize distortion/overloading.

Yes, the manual could have been better translated from the German.

You have got read the manual front to back several times. And don't give up.

I recommend you get your hands on the excellent review of RadioCom 6.0 in the Dec '08 and Jan '09 issues of Monitoring Times.


DL8FAI Rating: 5/5 Nov 9, 2008 11:41 Send this review to a friend
works well on XP  Time owned: more than 12 months
I have had no problems installing and running RadioCom on older and newer desktops or laptops (WIN XP or older). Neither did a liner shipping company in Florida (using 25+ copies) or fishing vessels active in the Pacific or the US Navy, plus hundreds of SWLs or HAM operators worldwide.

The latest version RadioCom 6.1 needs lots of RAM and a fast CPU. Runs under XP + VISTA.

It helps to understand your computer and sound card. And I noticed that you have to have patience: most PCs are no race horses anymore.

PS: the US-distributor moved to Michigan (due to Hurricane Wilma).
Info at

Cord, W8/DL8FAI
KD4LLA Rating: 0/5 Mar 12, 2008 18:55 Send this review to a friend
I am glad I did not pay for it  Time owned: 0 to 3 months
I would not give this crappy software away. No wonder Icom threw it in for free. I just cannot get it to WORK with my MS XP machine. Then I tried to find a contact person responsible so I can express my dislike--there is none! Cannot be found! The CD makes a nice coaster for my beer can though!
L_UMINA_EX_WT6G Rating: 0/5 Nov 9, 2004 20:19 Send this review to a friend
Worst Junk Ever!  Time owned: 6 to 12 months
I agree this is trashware. I returned the first package, but upon replacement it still does not function properly. Big issue is the "dongle" to stop you from making copies. Frankly, no one would want it! This software is not Microsoft compliant, the user interface is non-standard, non-intuitive, complex, and the product frequently fails with errors that are very uncommmon with Windows XP. In fact, this program has generated errors I've never seen before!

There seems to be some sensitivity between the dongle and certain serial ports. My PC is a standard HP unit which meets specifications and the dongle has worked, but not always, and because the software is not Microsoft compliant, other programs unknowingly may interfere with it.

The bottom line is that if you have a PC with nothing else running on it, plenty of time to spend debugging various configurations that iinteract with Bonito, and lots of patience and money to waste, this product is for you.

If you are a normal person, DON'T BUY THIS PRODUCT. You will lose your money, you won't get any use out of it, and frankly, as an EE myself, I'm not sure that the algorithms are correctly implmented. Unfortunately, I've not had the softwre working long enough to verify my suspicions.

It's now uninstalled from my machine. I'm running writelog here connected to 3 rigs, a power analyzer from medusa research, a D700 on packet - all serial - all work fine, even at the same time. I'm telling you this so you can understand that I have quite a large station, and I'm not a neophyte.

I recommend you do exactly what N7BUI says and TOSS IT!

N7BUI Rating: 0/5 Oct 8, 2004 20:40 Send this review to a friend
Toss it straight into the trash.  Time owned: more than 12 months
After owning 2 different versions of the Bonito software all I can say is "TOSS IT!!!". This software has about the prettiest graphical interface that you will run across. That's where the compliments stop. I've used this junk on an Icom transceiver AND an Icom PCR-1000. I'm not sure what Icom was thinking when it was included in the package for the PCR-1000. The controls are extremely difficult to use and the audio spectrum analyzer is almost hopeless to use to tune a digital signal. It doesn't even have direct frequency entry!!! Even the most basic freeware available allows for that. Instead the software uses a "mouse drag" bar where I guess the idea is to stop somewhere in the range of the radio. When it came time to decode digital signals (when you could get them in the "decode window") it failed miserably. And to top it all off the manual reads like it was written by a 1st grade student while playing his Nintendo. MixW is by far a better program, that will decode many modes reliably.
<— Page 2 of 2

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.